Ball trigger with a 5 and an 8 mm ball on the two ends. Ball triggers are fine because you’ll always have the same trigger weight, but it’s a severe problem that you can’t feel the direction of the pull. This Ball trigger is available in Offset version, too.
This trigger blade has been designed specially for a former FT world champion, who has got very short fingers and had always been struggling to reach the trigger. The trigger blade has got a greater offset and when rotated, can bring the contact point even more backwards. The surfaces are the same as on the standard trigger set.
This is the articulated arm from the FlexiPoint Offset Trigger, with an adapter element it can be connected to the PinPoint Trigger system, too. In most cases, it’s strongly recommended to use the genuine FlexiPoint system for offset structures, because it connects more steady to the rifle action, using both trigger rods (most German made rifles) or holding the rod by two grub screws from the two sides (AirArms Pro-Target / EV-2 / FTP-900).. But if you have got a custom made wooden stock, it may be too tight for the FlexiPoint system but this variation can help… You can buy additional trigger blades with different surfaces for this arm here: FlexiPoint Spare Blades.
This special trigger blade allows you to use my trigger blade vertically. This is closer to the usual trigger blade designs, and allows the vertical adjustment of the blade, too. You can buy additional trigger blades with different surfaces here: FlexiPoint Spare Blades.
If you can’t find your hook here, don’t worry! Please contact me with your rifle details and I’ll design your own FolloWing Adapter. All versions come with appropriate stainless steel bolts and nuts and are ready to connect to your hook.
For more information please read the Product Description below.
If you need some spacers for your butt-hook, cheek piece or hamster, try the WonderBar adjustable spacers!
A traditional version of the FWB Anti-POI-Shift Kit, made of aluminium:
One of them replaces the original A-clamp and holds only the cylinder. It has a plastic insert to protect the cylinder surface.
The other one is a modified A-clamp, it goes to the joint of the air cylinder and the reg. It holds the barrel and has 3 threaded holes in the bottom for precise positioning, and both sides are milled to reduce the possible torque on the barrel.
With stainless steel screws. Easy mounting (you’ll have to drill only a 5 mm hole). With smaller usage marks but in perfect working condition.
Precision offset trigger with wide range of adjustments, for the following rifles:
AirArms Pro-Target / EV-2 / FTP-900
Feinwerkbau (all models)
Walther (all models)
The trigger comes complete with a two-sided ‘pyramids’ trigger blade and now with a bonus blade of your choice. If you wish, you can order additional / other trigger blades here: FlexiPoint spare blades.
In most cases, it’s recommended to use the genuine FlexiPoint Trigger, because it connects more steady to the rifle action, using both trigger rods (German made rifles) or holding the rod by two grub screws (AirArms). But if you’ve got a custom stock that is too tight for the FlexiPoint trigger, a possible solution is to use a PinPoint trigger with this offset blade. For this option, simply choose PinPoint in ‘Adapter type’ drop-down menu.
If you’re after a simpler centre / small offset trigger, please have a look at PinPoint Trigger, too.
Ball trigger with a 5 and an 8 mm ball on the two ends. Ball triggers are fine because you’ll always have the same trigger weight, but it’s a severe problem that you can’t feel the direction of the pull. If you ask me, you should rather choose a round trigger instead from my standard blades, it’s much better. This Ball trigger is available in Offset version, too.
Small horizontal trigger with pyramids on both sides (fine and coarse). Similar to the ball but you can feel the direction of the pull.
These blades have a big round surface that fits to the fingertip. There are four different surfaces, they look quite similar but each version gives a totally different feel on the trigger, so you can choose the one that fits to your shooting style the best.
‘Centre’ gives a d=2 mm sharp point in the middle, giving a very precise feedback of the actual pull weight, the edge gives only a small hint of the right pull direction.
‘Deep’ follows the shape of the fingertip, giving a comfortable and evenly distributed contact on the whole surface.
‘Edge’ is for those who are after the right pull direction, combined with a comfortable feeling of the deeper middle surface.
‘Flat’ feels like a flat surface, simple and precise.
Traditional straight and curved blades, 8mm wide, 20mm high surface with vertical grooves, the middle height is marked with a horizontal groove.
Special edition of the good old FolloWing, for Feinwerkbau rifles. It replaces the two moveable parts of the butt-hook. The massive upper part hold the FolloWing extension, and gives a wide contact surface. The triangular lower part acts as a small butt-hook, and can hold a d=10 mm extension rod if needed. Wil fit to the original FWB butt-hook with a minor modification, but please contact me before ordering.
Precisely adjustable pointer for reading the parallax wheels in different conditions. For temperature shifting scopes, light/dark environments, old eyes etc.
Fits to all 1″ / 30 mm / 34 mm scope tubes or 42-43 mm ocular tubes for sharkfin wheels – and needs only 10×10 mm space in width and length as seen on the picture. With stainless steel screws and steel pins.
This pointer can be adjusted within 20 mm or 30 mm with a thumb screw, allowing precise and repeatable positioning of the pointer. The scale has got 2 mm divisions. No need to fix and release, the pin has got some friction so it always stays where you set it with the screw, no accidental move (by your shooting jacket or rifle case).
The adjustable pointer comes with an additional pin 3 mm under the other one, for combining the effects (e.g. use the screw adjustment of the pointer to compensate scope temp shift and use the two pins for light and dark targets). If you need a longer or shaped pin, you can simply replace the original steel pins with any <1mm wire or paper clip.