Save up to £30.00!
Gearbox Winding Forend
Gearbox Winding Forend
Gearbox Winding Forend

The forend you have always wanted:

  • Continuous height adjustment between 45-105mm
  • Just wind the handle, even while aiming
  • Self-locking in any position
  • For right and left handed use
  • Lightweight, only 170g / 290g (Original / Duplex)

If you are after something much bigger, made of metal and with traditional adjustments, check out our Rowan’s Forend + Gripster combination.

£99.99£169.99 Select options
Rowan’s Forend (+ Gripster)
Rowan’s Forend (+ Gripster)
Rowan’s Forend (+ Gripster)

Rowan Engineering’s industry standard forend mechanism with full range of the original adapters with an optional Gripster palm shelf, also allowing to connect the JOPA folding bipod (to the 6 or 7 indents versions).

Please allow a couple of days for dispatch this order.

If you are after a smaller and lighter mechanism but with some extra comfort, check out our Gearbox Winding Forend.

The hamster can be bought separately, too: Gripster hamster

£299.95 Add to basket
SmartPin Combi with Magnifier
SmartPin Combi with Magnifier
SmartPin Combi with Magnifier

This is a special version of the ‘FT industrial standard’ SmartPin Adjustable Pointer, its long scale (30mm) version combined with the EagleEye Clicks Magnifier for those who don’t have much space on the scope tube.

The SmartPin Combi pointer has one or two magnifier windows for the click turret(s), and needs only 10mm only on the scope tube!

High quality laser sintered Nylon, stainless steel bolts and nuts, Fresnel type 3x mag plastic lenses.
It can happen that you’ll need a stronger or weaker lens (depends on your eyesight), the frame can hold any flat lens up to 0.8 mm thickness or an acrylic lens that is cut to the right shape.

New updated ring design is available. The same function but a better looking ring, scope tube protection, bolt/nut secured against falling out.

For more features and combinations with other scope ring features see Every Possible (And Impossible) Scope Ring Combination.

£49.99£58.99 Select options
Scorpion Fully Adjustable FT Hook – MK5 New Design
Scorpion Fully Adjustable FT Hook – MK5 New Design
Scorpion Fully Adjustable FT Hook – MK5 New Design

Fully adjustable Field Target hook, with much more versatility than the usual Gemini clones. Everything can be adjusted even in the shooting position, without disassembling the hook. Modular system that can be upgraded later if needed. Massive construction, without any flex and slip, a lightweight and versatile alternative to the traditional metal hooks.

For additional extras and spare parts please see Scorpion FT Hook Extras
Fitting the hook to different stocks: see Scorpion Base Plates
The last couple of old design Scorpion MK4 hooks (R/H and true L/H) are available here: Scorpion MK4 on SALE

Scorpion MK5 New Design

I added a lot of improvements to my professional FT hook design, creating the MK5 (2023) version that will replace the discontinued MK4 (2016-2022) version. Some parts are backwards compatible with the MK4 so the two systems can be combined if you don’t mind some visual differences but I’d suggest not to mix the two systems.

Features on the new MK5 design (see detailed listing with photos and dimensions at the bottom of the web page):

  • Engraved marks for all adjustments – now you can record and reproduce your settings any time
  • New 152mm stainless steel hook, 137mm and 97mm Nylon FT-hooks
  • HFT-compatible 2.25” (57mm) Nylon hook
  • Extended upper wing base option, for better integration with the Butt Pad Kit or to add half a link length to the upper wing
  • Slim hook holder links – don’t protrude that much as the old design
  • Rounded link elements – gives a smoother fit when the links are twisted
  • HFT-compatible 2.25” (57mm) extended one-piece upper wing
  • Fully re-designed FolloWing articulated wing – with the massive cogs style connection instead of the weak link
  • Dual or single thumb screw variations for FT shooters
  • Dual or single bolt variations for HFT and other disciplines where a quick adjustment is not needed
  • Three T-Rail versions: 130mm, 150mm and NEW: 150mm with integrated inline monopod
  • 3-position limiter bolts on both ends of the T-rail
  • Coloured base plate and knobs are available, too
  • Other minor improvements that are not listed here

The new design Scorpion MK5 hooks are now in stock.

£109.90£199.90 Select options
Save up to £70.00!
Scorpion FT Hooks
Scorpion MK4 Fully Adjustable FT Hook – SALE
Scorpion MK4 Fully Adjustable FT Hook – SALE

Last ones of the old MK4 design ON SALE
Click here for the Scorpion New Design version.

Fully adjustable Field Target hook, with much more versatility than the usual Gemini clones. Everything can be adjusted even in the shooting position, without disassembling the hook. Modular system that can be upgraded later if needed.
Massive construction, without any flex and slip, a lightweight and versatile alternative to the traditional metal hooks.A

These are the very last ones of the old MK4 design and are on sale, so I can offer them only in these configurations listed below, but you can reduce the upper wing length if needed, or can add some extra parts in the options menu.
It is possible to buy certain MK5 parts as well, for a partial upgrade (but please contact me before placing an order to check compatibility!)

For additional extras and spare parts please see Scorpion FT Hook Extras

Fitting the hook to different stocks: see Scorpion Base Plates

The left handed versions are True L/H, i.e. fully mirrored in every detail.

£114.88£169.87 Select options
Scorpion FT Hook Extras MK4
Scorpion FT Hook Extras MK4

Extras and spare/replacement parts for the Scorpion MK4 FT hook system.

Fitting the hook to different stocks: see Scorpion Base Plates

£14.99£42.49 View products
Universal Adapter For CrystalSky 7.85″
Universal Adapter For CrystalSky 7.85″
Universal Adapter For CrystalSky 7.85″

Universal adapter for DJI CrystalSky 7.85″ monitors

Allows you to use the monitor in any general tablet holder, also works as a stand for watching movies.

High quality laser sintered Nylon, polished and dyed ‘carbon black’ finish, stainless steel bolts.

 

 

£19.99 Add to basket
Save £5.00!
‘Badger’ Trophy Stand
‘Badger’ Trophy Stand
‘Badger’ Trophy Stand

Elegantly designed stand for your BFTA Grand Prix badge (or other butterfly clutch type badges), so that it can have a worthy place among your other trophies. High quality laser sintered Nylon, polished surface.

Engraved plate with custom text is available as an additional option (please note that this adds 3-4 days to the delivery date).

£19.99 Add to basket
Every Possible (And Impossible) Scope Ring Combination
Every Possible (And Impossible) Scope Ring Combination
Every Possible (And Impossible) Scope Ring Combination

This is a unique product that allows you to combine Maestro Design’s new updated ring design scope parts in every possible (and impossible) combination:

  • Some of these combinations are really useful and have been working so fine that I’m already selling them under different names like SmartPin Adjustable Pointer, SmartPin Combi with Magnifier, EasyPin Extra Pointer, EagleEye Clicks Magnifier and Folding Windicator / Alligator Clip.
  • Some are not the usual combinations but may be perfect if this is what you want, e.g. a pointer on the left side and a click chart holder alligator clip on the right side.
  • Some are not too useful or won’t work at all in FT, mainly because the two halves ought to be on different places along the scope tube, e.g. a pointer with a magnifier where the pointer should be at the turret and the magnifier at the zoom ring. However, still might be useful for other shooting disciplines.
  • Some of them is pretty useless, nevertheless, I have allowed every possible (and impossible) combination, for experimenting or just for fun.

PLEASE NOTE that it’s your responsibility to carefully consider how the desired combination would work on your scope, where can you put it, will it not clash with other parts, is there enough space for the folding arm etc. If you are not sure please CONTACT ME before placing an order.

Most combinations are in stock but I can not guarantee this. If you need it urgently, please contact me before ordering to find out whether your combination is available.

Made of high quality laser sintered Nylon with stainless steel nuts and bolts.

£9.99£73.99 Select options
Save up to £10.00!
FolloWing MK5 / SteadyWing MK5 Hook Extensions
FolloWing MK5 / SteadyWing MK5 Hook Extensions
FolloWing MK5 / SteadyWing MK5 Hook Extensions

NEW DESIGN: The MK5 version of the well known FolloWing and SteadyWing systems.

These parts are actually the very same as the upper wings of the Scorpion MK5 FT Hook, and have a massive adapter that connects them to the original hook.

  • High quality laser sintered Nylon, polished and dyed ‘carbon black’ finish, stainless steel bolts and nuts.
  • Lightweight structure with a lot of adjustments
  • All adjustments are available even in shooting position
  • The links can be bent and twisted, too
  • Engraved marks for all adjustments – you can record and reproduce your settings any time
  • Rounded link elements – gives a smoother fit when the links are twisted
  • Fully re-designed system, with a massive cogs style connection instead of the weak link
  • True L/H version fully mirrored in every function, and now available in all variations
  • Please contact me with any questions, I can design any custom part or modify the existing ones, according to your needs.

Adapters in stock:

  • AirArms FTP-900
  • Anschütz 4765
  • MEC Free Position
  • Universal Converter for all old FW/SW/TW adapters

Adapters available on backorder:
If you can’t wait  a couple of weeks for the backorder, you may consider ordering the hook extension with the ‘Universal Converter’ and add an old style FolloWing adapter to the cart.

  • AirArms EV-2 
  • Anschütz Precise I
  • Feinwerkbau 603 / P70 / 700 / 800
  • Gehmann 809
  • Grünig&Elmiger hooks
  • MEC Contact-III
  • Steyr LG-100/110
  • System Gemini hook
  • TEC-HRO Fusion hook
  • Generic adapter A (standard) / B (reversed)

All versions come with appropriate stainless steel bolts and nuts and are ready to connect to your hook.

£69.90£84.90 Select options
Save up to £28.47!
SALE! FolloWing – SteadyWing – TopWing Hook Extensions
SALE! FolloWing – SteadyWing – TopWing Hook Extensions
SALE! FolloWing – SteadyWing – TopWing Hook Extensions

SALE!

Upper wing extension for FT butt-hooks – The last ones!

  • AirArms EV-2 / FTP-900
  • Anschütz 4765 / Precise I
  • Brian’s Hook
  • Feinwerkbau 603 / P70 / 700 / 800
  • Gehmann 809
  • Grünig&Elmiger hooks
  • MEC Contact-III / Free Position
  • Steyr LG-100/110
  • System Gemini hook
  • TEC-HRO Fusion hook
  • Generic adapter A (standard) / B (reversed)

All versions come with appropriate stainless steel bolts and nuts and are ready to connect to your hook.

NEW FolloWing MK5 / SteadyWing MK5 design is available now

£44.90£72.90 Select options
Scorpion Base Plates
Scorpion Base Plates
Scorpion Base Plates

Custom base plates and adapters for the Scorpion Field Target Hook, to fit it to different rifle stocks

Other spare parts are available here: Scorpion FT Hook Extras.

£4.99£49.90 Select options
Save up to £15.00!
SmartPin Adjustable Pointer
SmartPin Adjustable Pointer
SmartPin Adjustable Pointer

Precisely adjustable pointer for reading the parallax wheels in different conditions. For temperature shifting scopes, light/dark environments, old eyes etc.

Fits 1″ / 30mm / 34mm / 36mm / 40mm scope tubes or 42-43 mm ocular tubes for shark fin wheels – and needs only 10×10 mm space in width and length as seen on the picture. With stainless steel screws and steel pins.

This pointer can be adjusted within 20 mm or 30 mm with a thumb screw, allowing precise and repeatable positioning of the pointer. The scale has 2 mm divisions. No need to fix and release, the pin has got some friction so it always stays where you set it with the screw, no accidental move (by your shooting jacket or rifle case).

The adjustable pointer comes with an additional pin 3 mm under the other one, for combining the effects (e.g. use the screw adjustment of the pointer to compensate scope temp shift and use the two pins for light and dark targets). If you need a longer or shaped pin, you can simply replace the original steel pins with any <1mm wire or paper clip.

New updated ring design is available. The same function but a better looking ring, scope tube protection, bolt/nut secured against falling out.

For more features and combinations with other scope ring features see Every Possible (And Impossible) Scope Ring Combination.

£14.99£43.99 Select options
Save up to £2.50!
SmartPin Coloured
SmartPin Coloured
SmartPin Coloured

Experimental project:…
Coloured versions of the FT industrial standard SmartPin Adjustable Pointer.
The usual quality laser sintered Nylon parts just in another colours.

There is only one from each colour (Red, Green, Blue and Yellow) with the following parameters:

  • Ring diameter 30mm
  • Scale length 30mm
  • Pointer 2-pins
  • New design

Have fun! :-)

£39.99£42.49 Select options
EasyPin Extra Pointer
EasyPin Extra Pointer
EasyPin Extra Pointer

Adjustable angle scope pointer (10°–90° to the scope tube, two positions). Fits 1″ / 30mm / 34mm / 36mm / 40mm scope tubes, and needs only 10 mm space on the tube. The top is 11.5 mm above the tube in vertical pin position..

For parallax wheels and click turrets.

With stainless steel screws and steel pin. If you need a longer or shaped pin, you can simply replace the original pin with any <1mm wire.

New updated ring design is available. The same function but a better looking ring, scope tube protection, bolt/nut secured against falling out.
The 30/34mm new design pointers are available in a ‘Target’ version i.e. with two pointers, one for the elevation turret and another on on the side for the windage turret.

For more features and combinations with other scope ring features see Every Possible (And Impossible) Scope Ring Combination.

£19.99£28.99 Select options
EasyPin scope pointer
EasyPin – general view
EasyPin Pointer

Simple and lightweight scope pointer. Fits to all 1″ / 30 mm / 34 mm scope tubes, and needs only 10×10 mm space in width and length as seen on the picture.
For 36mm and 40mm tube diameters see EasyPin Extra

For click turrets with a custom made cap, or for sidewheels. With stainless steel screws and steel pin. If you need a longer or shaped pin, you can simply replace the original pin with any <1mm wire. Find out which pointer suits you best: Scope Pointer Comparison Table

NEW: there is an advanced version of this pointer available, too, with adjustable pin angle and also for 36mm and 40mm scope tubes: EasyPin Extra Scope Pointer

£14.99 Select options
FWB Stock Middle Parts
FWB Stock Middle Parts
FWB Stock Middle Parts

Replacement elements for the FWB P70 Alutec stock, giving new features to the rifle:

  • Fully adjustable offset grip
  • Elevating the rear part by 50 mm
  • Saving 250 g weight

Also the original grip can be used (but without the offset feature). The parts are made of laser sintered Nylon, lightweight but very strong, I personally have tested this kit on my rifle. The new design elevates the cheek piece part so it fits better to high FT scopes. The grip is fully adjustable, and the offset can be set between 7.5 and 22.5 mm.

Right handed, used but in “as new” condition, with some very small usage marks. Can be bought with a ball grip and/or with a grey anatomic grip.

In order to use this kit, you have to cut your original stock, and drill 3 new holes onto it, I’ll attach the technical drawings of all these modifications of course.

I can offer a full FWB collection, please contact me for a discounted price if you are interested in the following products together:

£189.90£219.90 Select options
FWB Loading Port Handle
FWB Loading Port Handle
FWB Loading Port Handle

Comfortable handle for the loading port of Feinwerkbau P70 rifles. Replaces the original ugly white handle with a much better one. In R/H and L/H versions, made of laser sintered Nylon with stainless steel screws.

With this, you can close the loading port by rotating the handle easily by the two rounded ends, instead of pushing it down with a quite big force.

The handle is combined with an automated safety mark: when the loading port is open, a piece of flexible cable tie blocks your trigger finger, but goes out of the way when the port is closed.

£19.99 Select options
Magnifying window for the scope turret
EagleEye Clicks Magnifier
EagleEye Clicks Magnifier

Magnifier for the clicks turret, fully adjustable, with a lightweight and unbreakable 3x mag Fresnel lens. Visible lens size 28×17 mm. Fits 1″ / 30mm / 34mm / 36mm / 40mm scope tubes. It can happen that you’ll need a stronger or weaker lens (depends on your eyesight), the frame can hold any flat lens up to 0.8 mm thickness or an acrylic lens that is cut to the right shape.

Check out its brother, too: EagleEye Parallax Magnifier. Please note that there is a new design that may slightly differ from the pictures.

The magnifiers can be ordered also in ‘Target shooter’ version with two magnifying windows (for elevation and windage turret)

New updated ring design is available. The same function but a better looking ring, scope tube protection, bolt/nut secured against falling out.

For more features and combinations with other scope ring features see Every Possible (And Impossible) Scope Ring Combination.

£19.99£28.99 Select options
EagleEye Parallax Magnifier
EagleEye Parallax & Click scope magnifiers
EagleEye Parallax Magnifier

Magnifier for the parallax wheel, fully adjustable, with a lightweight and unbreakable Fresnel lens. Visible lens size 12.5×38.5 mm. Fits to all major scopes, can be folded up for safe carrying.

Please understand that it can happen that you’ll need a stronger or weaker lens (depends on your eyesight), the frame can hold any flat lens up to 0.8 mm thickness or an acrylic lens that is cut to the right shape.

If you have got a rubber ‘scope enhancer’, you can choose the special ‘Enhancer’ version that is a flexible half cylinder and can be mounted on the rubber enhancer by two massive cable ties.

Check out my new clicks magnifier, too: EagleEye Clicks Magnifier.

New updated ring design: The same function but a much wider adjustment range (40-45mm or 42-47mm) and a better looking ring, ocular tube protection, bolt/nut secured against falling out.

£34.99£39.99 Select options
Feinwerkbau Anti-POI-Shift Kit, two parts
FWB Anti-POI-Shift Kit
FWB Anti-POI-Shift Kit

The FWB Anti-POI-Shift Kit stands of two laser sintered Nylon parts, they look the same but they’re a bit different inside:

  • One of them replaces the original A-clamp and holds only the cylinder and protects the barrel from accidental kicks but lets it free float.
  • The other one goes to the joint of the air cylinder and the reg. It can be fixed onto the barrel by two symmetrical grub screws that push small Nylon parts to the barrel and thus don’t scratch its surface.

With stainless steel screws, all secured against falling out. Easy mounting (you’ll have to drill only a 5 mm hole).

For a perfect solution please see also: FWB Anti-POI-Shift Rail

£59.90£79.90 Select options
FlexiPoint Offset Trigger
FlexiPoint Offset Trigger
FlexiPoint Offset Trigger

Precision offset trigger with wide range of adjustments, for the following rifles:

  • Anschütz
  • AirArms Pro-Target / EV-2 / FTP-900
  • Feinwerkbau (all models)
  • Hämmerli AR-20
  • Steyr LG-100/110
  • Thomas
  • Walther (all models)

The trigger can be ordered with a wide variety of different trigger blades on a bundle price (they can be ordered later on full price here: FlexiPoint spare blades).

In most cases, it’s recommended to use the genuine FlexiPoint Trigger, because it connects more steady to the rifle action, using both trigger rods (German made rifles) or holding the rod by two grub screws (AirArms). But if you’ve got a custom stock that is too tight for the FlexiPoint trigger, a possible solution is to use a PinPoint trigger with this offset blade. For this option, simply choose PinPoint in ‘Adapter type’ drop-down menu.

If you’re after a simpler trigger which is in the centre or has only a small offset, please have a look at PinPoint v.2 Trigger, too.

£49.90 Add to basket
PinPoint v.2 Trigger
PinPoint v.2 Trigger
PinPoint v.2 Trigger

Precision trigger for the following rifles:

  • Anschütz
  • AirArms Pro-Target / EV-2 / FTP-900
  • Daystate Adjustable Trigger
  • Feinwerkbau (all models)
  • FX Impact
  • Hämmerli AR-20
  • Steyr LG-100/110
  • Suhl 150
  • Thomas
  • Walther (all models)

The trigger can be ordered with a wide variety of different trigger blades on a bundle price (they can be ordered later on full price here: FlexiPoint spare blades).

Offset 0-10mm to both sides. If you need a trigger with more offset (up to 46 mm!) and much more adjustment options, check out my Flexipoint trigger.

£39.90 Add to basket
FolloWing Adapter
FolloWing Adapter
FolloWing Adapter

Adapter piece to contact your existing FolloWing / SteadyWing / TopWing upper wing extension to another rifle or hook system:

  • AirArms EV-2 / FTP-900
  • Anschütz 4765 / Precise I
  • Brian’s Hook
  • Feinwerkbau 603 / P70 / 700 / 800
  • Gehmann 809
  • Grünig&Elmiger hooks
  • MEC Contact-III / Free Position
  • Steyr LG-100/110
  • System Gemini hook
  • TEC-HRO Fusion hook
  • Generic adapter A (standard) / B (reverse)

If you can’t find your hook here, don’t worry! Please contact me with your rifle details and I’ll design your own adapter.

All versions come with appropriate stainless steel bolts and nuts and are ready to connect to your hook.

For more information please read the Product Description below.

£17.99 Select options
ComBrella on the Combro chrony
ComBrella Combro shade bottom view
ComBrella shade for Combro

Snap-on shade for Combro Chrony

Combro Chronies use IR photodiodes as light source so they don’t need external light, but direct sunshine or fluorescent lights may disturb its function, resulting false readings.

This simple shade can be snapped onto the Chrony and gives an effective shade for the light sensors.

The new extended version connects with a bayonet to the Sniper barrel weight, keeping the chrony on its place, aligned with the barrel.

£19.99£29.99 Select options
Adjustable spacer
Adjustable spacer inside
WonderBar adjustable spacers (in pair)

A pair of two specially formed adjustable spacers that can connect to each other in four different heights:

Useful for spacing butt-hooks, hamsters and other rifle parts.

Prices stand for a pair of spacers.

LAST ONES!

£8.99£19.99 View products
FlexiPoint Spare Blades
FlexiPoint Spare Blades
FlexiPoint Spare Blades

These items are only spare parts for my trigger system (in black colour only), and allow you to try different surfaces and shapes to make sure, which one fits you the best in practice.

If you’d like to have a complete trigger, please click here: FlexiPoint offset trigger.

For detailed information please click on the tabs below:

Ball trigger with a 5 and an 8 mm ball on the two ends. Ball triggers are fine because you’ll always have the same trigger weight, but it’s a severe problem that you can’t feel the direction of the pull. If you ask me, you should rather choose a round trigger instead from my standard blades, it’s much better. This Ball trigger is available in Offset version, too.

FlexiPoint Blade - Ball 5-8 mm
FlexiPoint Blade – Ball 5-8 mm

Small horizontal trigger with pyramids on both sides (fine and coarse). Similar to the ball but you can feel the direction of the pull.

FlexiPoint Blade - Pyramids
FlexiPoint Blade – Pyramids

These blades have a big round surface that fits to the fingertip. There are four different surfaces, they look quite similar but each version gives a totally different feel on the trigger, so you can choose the one that fits to your shooting style the best.

  • ‘Centre’ gives a d=2 mm sharp point in the middle, giving a very precise feedback of the actual pull weight, the edge gives only a small hint of the right pull direction.
  • ‘Deep’ follows the shape of the fingertip, giving a comfortable and evenly distributed contact on the whole surface.
  • ‘Edge’ is for those who are after the right pull direction, combined with a comfortable feeling of the deeper middle surface.
  • ‘Flat’ feels like a flat surface, simple and precise.

FlexiPoint Blade - Round Centre
FlexiPoint Blade – Round Centre

FlexiPoint Blade - Round Deep
FlexiPoint Blade – Round Deep

FlexiPoint Blade - Round Edge
FlexiPoint Blade – Round Edge

FlexiPoint Blade - Round Flat
FlexiPoint Blade – Round Flat

Traditional straight and curved blades, 8mm wide, 20mm high surface with vertical grooves, the middle height is marked with a horizontal groove.

FlexiPoint Blade - Straight
FlexiPoint Blade – Straight

FlexiPoint Blade - Curved
FlexiPoint Blade – Curved



 

£3.99£4.99 View products