Filter Products
Four Seasons FT Light Gloves
Four Seasons FT Light Gloves
Four Seasons FT Light Gloves

The world’s first lightweight Field Target gloves, designed specially for FT / HFT shooting, by a Field Target shooter. These are light but very useful gloves, for the firing hand but also for the leading hand if you don’t like massive target gloves. The prices are per two pairs (one for winter and one for Summer), so you’ll get two glove for each hand.

Thumb is half length and the trigger finger even shorter so the shooter can easily pull the trigger and pick up a pellet, or rangefind and click with the other hand. The insulated winter version’s other fingers are full, while the thin summer gloves have all fingers in half length (except for the trigger finger that is quarter length). Both version’s palm is the same, it has got a very thin textile with an anti-slip silicone printing so the feeling on the rifle’s grip will be always the same. The gloves can be fixed at he wrist with velcro strips. The gloves on the photos are the prototypes that I have used in the last months, the final versions may differ in small details. See the product description at the bottom of this page for more information.

Available sizes: S, M, L, XL – see the glove sizing guide below.

Available colours: Black, Blue, Red.

Please note that the estimated delivery date for these gloves is some time in December, but this date may change.

£29.99 Select options
GAPacity Sidewheel
GAPacity Sidewheel
GAPacity Sidewheel

This is not about only the ‘design’, this wheel has got a special feature: all the gaps are nearly the same between 32-50 m (35-55 yds), every 5 m distance equals a 8-10 mm gap on the wheel. The big hole at the end is comfortable to adjust the wheel, also the other big hole can be used for quick adjustments.

There is a mark on the wheel, you have to mount the sidewheel in a way that this mark goes to the 50 m (55 yds) distance. After this, if you mark the other distances, you will find that all the longer distances are distributed evenly and with nice big gaps (depending your eyesight and rangefinding technique, minor differences may occur).

The sidewheel comes in a bundle with my SmartPin Long Scale / Linear adjustable pointer. Compatible scopes are Big Nikko MK1-2-3, Sightron S-III, Falcon T series, Leapers Accushot, Leupold Competition and S&B FT/PM-II at the moment, but I can design your own GAPacity wheel version for your scope.

£49.99£89.99 Select options
InkWell for Pellet Sizer
InkWell for Pellet Sizer
InkWell for Pellet Sizer

Pellet collector for pellet sizers (UK Neil d=16mm round and hexagonal 16mm at the moment), but I can design a variation for you to any other size). Please note that the pellet sizer is NOT included, it has to be bought separately from UK Neil or other manufacturers.

Can collect about 300 pellets. If you take the bottom plate off, will fit firmly into a tin so you can size the pellets directly into the tin.

It can be personalised with your name/nickname, too.

Laser sintered Nylon in black velvet colour, stainless steel screws.

Some words from the product’s first user: A great product. Very light. The UK Neil sizer slides into the ink well holder for a perfectly snug fit. Enables speedy sizing and any pellets dropped fall onto the top of the well. This stops the odd dropped pellet falling into your sized pellets by mistake. Perfect.

£39.99£49.99 Select options
MicroLevel Adapter For Sightron S-III
MicroLevel Adapter For Sightron S-III
MicroLevel Adapter For Sightron S-III

Adapter for using MicroLevel electronic level indicator on Sightron S-III scopes with reticle illumination.

It can be mounted on the ocular tube, the tapered end goes into the MicroLevel’s rubber ring and has got grooves for the cable tie fixing. The inside will remain matte black for reducing light reflections. Four different lengths, by cutting off one or more rings from the end, each cut shortens it by 6 mm.

For more info please contact me.

£49.90 Add to cart
SAS Adjustable Forend
SAS Adjustable Forend
SAS Adjustable Forend

Simple but massive adjustable forend mechanism on an affordable price, with black levers, also can be moved along the stock back and forth in standard accessory rails. Please note that some photos are a bit outdated, all three screws have got the new black plastic adjustable locking levers, no more quick release clamps.

  • Main unit centre-to-centre: 205 / 155 / 130 mm (see variations)
  • Colour: medium grey (lye and lacquer), sorry but silver and black are out of stock.
  • Black plastic levers, adjustable position
  • Hamster plate: 50×217 mm, two positions (held by two M5 screws, 25mm CTC)
  • T-nut: 12.8 mm wide at the top, 10 mm at the neck (please check your accessory rail’s dimensions before ordering!)

Designed and manufactured by Ferenc Sas, Europe Champion 2016.

£139.90£144.90 Select options
Sniper Barrel Weight for FWB
Sniper Barrel Weight for FWB
Sniper Barrel Weight for FWB

Flat barrel weight for Feinwerkbau rifles. The same weight (79 g) as the original FWB aluminium barrel weight but allows using longer cylinders – it is only 1 mm thick below and above the barrel. Laser sintered Nylon, with stainless steel grub screws.

Intimidate your opponents with a rifle that looks like a .50 cal sniper gun! ;-)

Designed for Feinwerkbau rifles but can fit to any other rifle with a 20 mm barrel shroud diameter (e.g. Anschütz). For other diameters please contact me.

£49.90 Add to cart
Save up to £5.00!
THE Field Target Shooting Glove
THE Field Target Shooting Glove
THE Field Target Shooting Glove

The world’s first dedicated Field Target glove, designed specially for FT / HFT shooting, by a Field Target shooter. This is a high quality heavy target glove, for the leading hand (left hand for a right-handed shooter and vica versa), padded and with Top Grip on most surfaces.

Three fingers are half length so the shooter can easily rangefind and click the scope. Thick but quite flexible Top Grip pads on every surface where needed for every shooting position and with elastic wrist band.

Available sizes: XS, S, M, L, XLplease check the sizing guide below for your glove.

Available colours: Black, Blue, Red (sorry but only Black for L/H shooters)

£29.99 £24.99£29.99 Select options
Save up to £5.00!
ZoomR Magnification Lever
ZoomR Magnification Lever
ZoomR Magnification Lever

A simple and streamlined design for those who want something more professional than those 2-pounds fishing coasters. This zoom lever is worthy of your scopes and of the other Maestro Design accessories on your scope.

Fits to many scope models, and of course I can design your own ZoomR version for your scope. 12 mm thick, lightweight, comfortable and sure grip in all conditions. Made of strong laser sintered Nylon, with stainless steel screws.

£34.99 £29.99£34.99 Select options
DualCore Sidewheel
DualCore Sidewheel
DualCore Sidewheel

A unique parallax wheel with two centres: can be used in centered or in excentric position, wide space for the scale, strong and unbreakable. See the details at the bottom on the page.

This sidewheel has been designed on a way, that it will fit to the scope and to my EasyPin pointer / MultiPin / SmartPin and ProTurret Click Knob as well. If you order only a sidewheel, please make sure that it does not clash with the third party accessories. If you have any questions, please contact me before placing an order.

The pointers fit perfectly to my sidewheel, I recommend to buy them together. The ring size will be automatically selected according to your scope’s tube diameter. If you want me to send a pointer with an extended scale (10 mm more travel for the pin/stripe), please select your pointer type here and add 5 pounds to the order by using the Additional Payment page.

This product is usually not in stock, please place your order and it will be manufactured for you in 2-4 weeks. A 90 mm Leupold wheel is available with any pointer, even if it is marked available on backorder only.

£69.99£144.99 Select options
ProTurret Click Knob
ProTurret Click Knob
ProTurret Click Knob

A professional scope turret: resettable without any tool, adjustable bottoming ring, pellet holder, big diameter (54 mm). See the details at the bottom on the page.

This turret has been designed on a way, that it will fit to the scope and to my EasyPin pointer and DualCore sidewheel as well. If you order only a turret, please make sure that it does not clash with the third party accessories. If you have any questions, please contact me before placing an order. For Sightron S-III scopes please check your turret type (target/tactical, see the pictures on the left).

About the “Bottoming” option: if your scope turrets go slowly in and out when you click, I’d suggest to choose the “bottoming” version, with this you can always set your clicks back to the top of the trajectory and won’t be ‘one turn out’ accidentally. If the turrets keep their height while rotated, then always select “simple”.

The pointer fits perfectly to my turret, I recommend to buy them together (you’ll get the pointer on a bundle price). The ring size will be automatically selected according to your scope’s tube diameter.

This product is usually not in stock, please place your order and it will be manufactured for you in 2-4 weeks.

£44.99£79.99 Select options
Save up to £15.00!
SmartPin Adjustable Pointer
SmartPin Adjustable Pointer
SmartPin Adjustable Pointer

Precisely adjustable pointer for reading the parallax wheels in different conditions. For temperature shifting scopes, light/dark environments, old eyes etc.

Fits to all 1″ / 30 mm / 34 mm scope tubes or 42-43 mm ocular tubes for sharkfin wheels – and needs only 10×10 mm space in width and length as seen on the picture. With stainless steel screws and steel pins.

This pointer can be adjusted within 20 mm or 30 mm with a thumb screw, allowing precise and repeatable positioning of the pointer. The scale has got 2 mm divisions. No need to fix and release, the pin has got some friction so it always stays where you set it with the screw, no accidental move (by your shooting jacket or rifle case).

The adjustable pointer comes with an additional pin 3 mm under the other one, for combining the effects (e.g. use the screw adjustment of the pointer to compensate scope temp shift and use the two pins for light and dark targets). If you need a longer or shaped pin, you can simply replace the original steel pins with any <1mm wire or paper clip.

Find out which pointer suits you best: Scope Pointer Comparison Table

Another variation for excentric or shaped sidewheels: SmartPin Linear

£29.99£34.99 £14.99£34.99 Select options
Save up to £15.00!
SmartPin Linear Pointer
SmartPin Linear Pointer
SmartPin Linear Pointer

Precisely adjustable linear pointer for reading the parallax wheels in different conditions. For temperature shifting scopes, light/dark environments, old eyes etc.

Fits to all 1″ / 30 mm / 34 mm scope tubes or 42-43 mm ocular tubes – and needs only 22×12.4 mm space in width and length as seen on the picture. With stainless steel screws.

This pointer height can be adjusted within 15 mm or 25 mm (new!) with a thumb screw, allowing precise and repeatable positioning of the pointer. The scale has got 2 mm divisions. No need to fix and release, the pin has got some friction so it always stays where you set it with the screw, no accidental move (by your shooting jacket or rifle case).

The linear adjustable pointer comes with a thin Nylon strip that is very easy to cut, it is suggested to cut to the right shape with a sharp blade and use it as a template for making a metal plate as a final pointer.

Another variation for standard sidewheels: SmartPin Adjustable Pointer

£34.99£39.99 £19.99£39.99 Select options
Save up to £5.00!
SmartPin Extra S&B + EEC
SmartPin Extra S&B + EEC
SmartPin Extra S&B + EEC

This is a special version of the SmartPin Adjustable Pointer, designed to correct the huge temp shift of the Schmidt&Bender 12.5-50×56 FT scope. Optionally with a special version of the EagleEye Clicks magnifier (with acrylic lens in it). More information in this blog post: SmartPin Extra: S&B + EEC

Scope tube diameter 30 mm, colour Black Velvet.

Check out this, too: EagleEye Parallax Magnifier: GET £5 OFF if buying an EagleEye Parallax magnifier together with this product, using coupon code EAGLE-SMART at checkout.

£39.99£59.99 £34.99£59.99 Select options
Save up to £9.00!
MultiPin Scope Pointer
MultiPin Scope Pointer
MultiPin Scope Pointer

Multiple scope pointer for rangefinding in different environmental conditions. For temperature shifting scopes, light/dark environments, old eyes etc.

Fits to all 1″ / 30 mm / 34 mm scope tubes, and needs only 10×10 mm space in width and length as seen on the picture. With stainless steel screws.

This pointer has got 5 steel pins, 5 mm distances, covering a 20 mm range. You can remove any of them independently, and if you need a longer or shaped pin, you can simply replace the original pins with any <1mm wire.

Find out which pointer suits you best: Scope Pointer Comparison Table

£18.99 £9.99£18.99 Select options
EasyPin Extra Scope Pointer
EasyPin Extra Scope Pointer
EasyPin Extra Scope Pointer

Adjustable angle scope pointer (10°–90° to the scope tube, two positions). Fits to all 1″ / 30 mm / 34 mm scope tubes, and needs only 10 mm space on the tube. The top is 11.5 mm above the tube in vertical pin position..

For parallax wheels and click turrets.

With stainless steel screws and steel pin. If you need a longer or shaped pin, you can simply replace the original pin with any <1mm wire.

New product!

£19.99 Select options
EasyPin Scope Pointer
EasyPin Scope Pointer
EasyPin Scope Pointer

Simple and lightweight scope pointer. Fits to all 1″ / 30 mm / 34 mm scope tubes, and needs only 10×10 mm space in width and length as seen on the picture.

For click turrets with a custom made cap, or for sidewheels.

With stainless steel screws and steel pin. If you need a longer or shaped pin, you can simply replace the original pin with any <1mm wire.

Find out which pointer suits you best: Scope Pointer Comparison Table

NEW: there is an advanced version of this pointer available, too, with adjustable pin angle: EasyPin Extra Scope Pointer

£14.99 Select options
FolloWing Universal
FolloWing Universal
FolloWing Universal

Adaptive upper wing for FT butt-hooks:

  • AirArms EV-2 / FTP-900
  • Anschütz 4765 / Precise I
  • Brian’s Hook
  • Feinwerkbau 603 / P70 / 700 / 800
  • Gehmann 809
  • Grünig&Elmiger hooks
  • MEC Contact-III / Free Position
  • Steyr LG-100/110
  • System Gemini hook
  • TEC-HRO Fusion hook
  • Generic adapter A (standard) / B (reverse)
  • Design my own adapter!

If you can’t find your hook here, don’t worry! Please contact me with your rifle details and I’ll design your own FolloWing Adapter. All versions come with appropriate stainless steel bolts and nuts and are ready to connect to your hook.

For more information please read the Product Description below.

If you need some spacers for your butt-hook, cheek piece or hamster, try the WonderBar adjustable spacers!

£74.90£84.90 Select options
SteadyWing Hook Extension
SteadyWing Hook Extension
SteadyWing Hook Extension

An advanced hook upper wing extension for a lot of FT-hooks.

This is the little brother of the FolloWing, without the adaptive moving but gives a wide range of adjustments by the joints and the independently adjustable caterpillar legs. The end element of the wing can be rotated, too.

SteadyWing is compatible with the following hooks:

  • AirArms EV-2 / FTP-900
  • Anschütz 4765 / Precise I
  • Brian’s Hook
  • Feinwerkbau 603 / P70 / 700 / 800
  • Gehmann 809
  • Grünig&Elmiger hooks
  • MEC Contact-III / Free Position
  • Steyr LG-100/110
  • System Gemini hook
  • TEC-HRO Fusion hook
  • Generic adapter A (standard) / B (reverse)
  • Design my own adapter!

If you can’t find your hook here, don’t worry! Please contact me with your rifle details and I’ll design your own adapter. All versions come with appropriate stainless steel bolts and nuts and are ready to connect to your hook.

For more information please read the Product Description below.

If you need some spacers for your butt-hook, cheek piece or hamster, try the WonderBar adjustable spacers!

£54.90£94.90 Select options
FWB Stock Middle Parts
FWB Stock Middle Parts
FWB Stock Middle Parts

Replacement elements for the FWB P70 Alutec stock, giving new features to the rifle:

  • Fully adjustable offset grip
  • Elevating the rear part by 50 mm
  • Saving 250 g weight

Also the original grip can be used (but without the offset feature). The parts are made of laser sintered Nylon, lightweight but very strong, I personally have tested this kit on my rifle. The new design elevates the cheek piece part so it fits better to high FT scopes. The grip is fully adjustable, and the offset can be set between 7.5 and 22.5 mm.

Right handed, used but in “as new” condition, with some very small usage marks. Can be bought with a ball grip and/or with a grey anatomic grip.

In order to use this kit, you have to cut your original stock, and drill 3 new holes onto it, I’ll attach the technical drawings of all these modifications of course.

I can offer a full FWB collection, please contact me for a discounted price if you are interested in the following products together:

£239.90£269.90 Select options
Sold
FWB Stock Middle Parts ALU
FWB Stock Middle Parts ALU
FWB Stock Middle Parts ALU

Replacement elements for the FWB P70 Alutec stock, giving new features to the rifle:

  • Fully adjustable offset grip
  • Elevating the rear part by 50 mm

Also the original grip can be used (but without the offset feature). The long part is an original FWBstock part but with some dead weight (57 g) removed. The new connection part is made of aircraft-grade aluminium alloy, it elevates the cheek piece part so it fits better to high FT scopes. The grip is fully adjustable, and the offset can be set between 0 and 30 mm.

Right handed, used but in good condition, with some minor usage marks. Can be bought with a ball grip and/or with a grey anatomic grip.

In order to use this kit, you have to cut your original stock, and drill 3 new holes onto it, I’ll attach the technical drawings of all these modifications of course.

I can offer a full FWB collection, please contact me for a discounted price if you are interested in the following products together:

£289.90£319.90 Select options
FWB Custom Wooden Parts
FWB Custom Wooden Parts
FWB Custom Wooden Parts

Cheek piece & forend sets for FWB P70 Alutec or old style P700.

Made of cherry wood, with teak oil and hard oil finish.

With stainless steel screws.

Used, but in good condition.

£54.90£59.90 Select options
FWB Loading Port Handle
FWB Loading Port Handle
FWB Loading Port Handle

Comfortable handle for the loading port of Feinwerkbau rifles. Replaces the original ugly white handle with a much better one. In R/H and L/H versions, made of laser sintered Nylon with stainless steel screws.

With this, you can close the loading port by rotating the handle easily by the two rounded ends, instead of pushing it down with a quite big force.

The handle is combined with an automated safety mark: when the loading port is open, a piece of flexible cable tie blocks your trigger finger, but goes out of the way when the port is closed.

£19.99 Select options
Save £10.00!
FolloWing for FWB
FolloWing for FWB
FolloWing for FWB

Special edition of the good old FolloWing, for Feinwerkbau rifles. It replaces the two moveable parts of the butt-hook. The massive upper part hold the FolloWing extension, and gives a wide contact surface. The triangular lower part acts as a small butt-hook, and can hold a d=10 mm extension rod if needed. Wil fit to the original FWB butt-hook with a minor modification, but please contact me before ordering.

£124.90 £114.90 Add to cart
Save £5.00!
EagleEye Parallax Magnifier v.1
EagleEye Parallax Magnifier v.1
EagleEye Parallax Magnifier v.1

Prototype version of the popular EagleEye Parallax Magnifier. Adjustable height and distance form the scope body. May be useful for front parallax scopes, mounted onto the top of the scope, or for side parallax scopes if you don’t mind the lack of the folding mechanism.

In good condition, as seen on the photos but with white cable ties.

This product is not in stock, it will be printed only when ordered. Please consider choosing the much more versatile final version of EagleEye Parallax Magnifier, it is only £5 more but with a lot of extras.

£29.99 £24.99 Add to cart
Save £2.01!
JSB Heavy .177
JSB Heavy .177
JSB Heavy .177

Brand new, unopened tin of 500 pellets. Head size 4.52 mm, weight 10.34 grains.

Preferably for personal collection, postage only at the buyer’s risk.

£10.00 £7.99 Add to cart
Save up to £2.26!
JSB Exact .177
JSB Exact .177
JSB Exact .177

Brand new, unopened tin of 500 pellets. Head size 4.51 mm, weight 8.44 grains.

Preferably for personal collection, postage only at the buyer’s risk.

£9.25 £6.99 Select options
EagleEye Clicks Magnifier
EagleEye Clicks Magnifier
EagleEye Clicks Magnifier

Magnifier for the clicks turret, fully adjustable, with a lightweight and unbreakable 3x mag Fresnel lens. Visible lens size 28×17 mm. Fits to all 1″ / 30 mm / 34 mm scope tubes. It can happen that you’ll need a stronger or weaker lens (depends on your eyesight), the frame can hold any flat lens up to 0.8 mm thickness or an acrylic lens that is cut to the right shape.

Check out its brother, too: EagleEye Parallax Magnifier: GET £5 OFF if buying an EagleEye Parallax and a Click magnifier together, using coupon code EAGLE-PAIR at checkout.

£19.99 Select options
EagleEye Parallax Magnifier
EagleEye Parallax Magnifier
EagleEye Parallax Magnifier

Magnifier for the parallax wheel, fully adjustable, with a lightweight and unbreakable 2x mag Fresnel lens. Visible lens size 12.5×38.5 mm. Fits to all major scopes, can be folded up for safe carrying. It can happen that you’ll need a stronger or weaker lens (depends on your eyesight), the frame can hold any flat lens up to 0.8 mm thickness or an acrylic lens that is cut to the right shape.

Ocular tube sizes of the most common scopes:

  • Leupold Competition: 39.5 mm
  • March 80x: 41.1 mm
  • Nikko Mk1-2, BSA: 42 mm
  • S&B FT, Nikko Mk3: 42.5 mm
  • Sightron S-III: 42.6 mm

If you have got a rubber ‘scope enhancer’, you can choose a special adapter that is a flexible half cylinder and can be mounted on the rubber enhancer by two massive cable ties.

Check out its brother, too: EagleEye Clicks Magnifier: GET £5 OFF if buying an EagleEye Parallax and a Click magnifier together, using coupon code EAGLE-PAIR at checkout.

£29.99 Select options
RaptoRail for Anschütz
RaptoRail for Anschütz
RaptoRail for Anschütz

Raptor style scope rail for Anschütz rifles.

Precision CNC machined from aircraft-grade aluminium, anodised.

Elevation 39 mm, slope 1.5% (1.5 mm @ 100 mm).

£214.90 Add to cart
Sold
FWB Anti-POI-Shift Rail
FWB Anti-POI-Shift Rail
FWB Anti-POI-Shift Rail

High quality scope rail, designed especially to work together with my FWB Anti-POI-Shift Kit, using these products together eliminates the POI-shifts on Feinwerkbau Alutec stocks. I’ve been using the same solution on my rifle, and zeroed my rifle last time in 2012, need to tell anything more?!?

Made of aircraft grade aluminium alloy, natural alu anodising, elevation 35 mm, reproduces the same dovetail on the top as the FWB’s original dovetail. Default slope is 0.71% = 24.4 MOA.

Compatible rifles: FWB P70 / P700 / P800.

For a perfect solution please see also: FWB Anti-POI-Shift Kit

£194.90 Read More
FWB Anti-POI-Shift Kit
FWB Anti-POI-Shift Kit
FWB Anti-POI-Shift Kit

The FWB Anti-POI-Shift Kit stands of two laser sintered Nylon parts, they look the same but they’re a bit different inside:

  • One of them replaces the original A-clamp and holds only the cylinder and protects the barrel from accidental kicks but lets it free float every time.
  • The other one goes to the joint of the air cylinder and the reg. It holds the barrel only in a 5 mm range so doesn’t give any torque to it. The barrel can be fixed by two symmetrical grub screws.

With stainless steel screws on the visible parts. Easy mounting (you’ll have to drill only a 5 mm hole).

For a perfect solution please see also: FWB Anti-POI-Shift Rail

£49.90 Add to cart
FlexiPoint Offset Trigger
FlexiPoint Offset Trigger
FlexiPoint Offset Trigger

Precision offset trigger with wide range of adjustments, for the following rifles:

  • Anschütz
  • AirArms Pro-Target / EV-2 / FTP-900
  • Feinwerkbau (all models)
  • Hämmerli AR-20
  • Steyr LG-100/110
  • Thomas
  • Walther (all models)

The trigger comes complete with a two-sided ‘pyramids’ trigger blade and now with 2 bonus blades of your choice. If you wish, you can order additional / other trigger blades here: FlexiPoint spare blades.

In most cases, it’s recommended to use the genuine FlexiPoint Trigger, because it connects more steady to the rifle action, using both trigger rods (German made rifles) or holding the rod by two grub screws (AirArms). But if you’ve got a custom stock that is too tight for the FlexiPoint trigger, a possible solution is to use a PinPoint trigger with this offset blade. For this option, simply choose PinPoint in ‘Adapter type’ drop-down menu.

If you’re after a simpler centre / small offset trigger, please have a look at PinPoint Trigger, too.

£19.99 Select options
Gemini Link
Gemini Link
Gemini Link

Nylon link element for Gemini hooks in two versions.

  • Normal: the copy of the original link element, but made of laser sintered Nylon and on half price.
  • Fixed angle: for shooters who are using too much force when holding the rifle. This link has a fixed connection on the side where bigger moments occur, this helps to keep its position.

Both versions come with stainless steel bolts and stainless steel Nyloc nuts. More information in this article.

I advise to use the Gemini Links in the following sequence:
Gemini hook –> Original link(s) –> GL Fixed Link –> GL Normal Link(s) –> original end element.

 

£6.99 View products
JOPA Folding Bipod
JOPA Folding Bipod
JOPA Folding Bipod

Folding bipod, made of quality materials and on a very friendly price (a similar one from Gemini is £81…). Body: black anodised aluminium alloy, legs: stainless steel with black plastic balls.

With long legs (12.5 cm = 5″ between the ground and the rifle’s stock), in black colour.

Fits to all rifles with standard accessory rail or similar (AirArms, Anschütz, Walther, Steyr, Feinwerkbau, Hämmerli etc.)

£59.90 Add to cart
PinPoint Trigger
PinPoint Trigger
PinPoint Trigger

Precision trigger for the following rifles:

  • Anschütz
  • AirArms Pro-Target / EV-2 / FTP-900
  • Feinwerkbau (all models)
  • Hämmerli AR-20
  • Steyr LG-100/110
  • Thomas
  • Walther (all models)

The trigger comes complete with a Pyramids trigger blade. If you wish, you can order other trigger blades here:

If you need a trigger with more offset (up to 46 mm!) and much more adjustment options, check out my new Flexipoint trigger.

£14.99 Select options
FolloWing Adapter
FolloWing Adapter
FolloWing Adapter

Adapter piece to contact your existing FolloWing or SteadyWing upper wing extension to another rifle or hook system:

  • AirArms EV-2 / FTP-900
  • Anschütz 4765 / Precise I
  • Brian’s Hook
  • Feinwerkbau 603 / P70 / 700 / 800
  • Gehmann 809
  • Grünig&Elmiger hooks
  • MEC Contact-III / Free Position
  • Steyr LG-100/110
  • System Gemini hook
  • TEC-HRO Fusion hook
  • Generic adapter A (standard) / B (reverse)
  • Design my own adapter!

If you can’t find your hook here, don’t worry! Please contact me with your rifle details and I’ll design your own adapter.

All versions come with appropriate stainless steel bolts and nuts and are ready to connect to your hook.

For more information please read the Product Description below.

£9.99£19.99 Select options
Sold
FolloWing Complete
FolloWing Complete
FolloWing Complete

This product is discontinued, replaced with my new Scorpion FT Hook system (now cheaper with a lot of adjustments and modular variations).

Adaptive upper wing for FT butt-hooks in kit with Brian’s Hook. Height adjustment with a thumb screw, two links (one of them removable) between the hook and the extension.

Fits to almost any rifle (you can drill holes on the base plate according to your rifle’s stock).

This product is discontinued, replaced with my new Scorpion FT Hook system (now cheaper with a lot of adjustments and modular variations).

£239.90 Select options
Save up to £5.00!
Scorpion FT Hook Extras
Scorpion FT Hook Extras

Extras and spare/replacement parts for the Scorpion v.4 FT hook system.

If you need anything else for your hook, please contact me and I’ll design what you need!

 

£4.99£24.99 View products
Save up to £35.00!
Scorpion Fully Adjustable FT Hook
Scorpion Fully Adjustable FT Hook
Scorpion Fully Adjustable FT Hook

Introductory prices until the end of this week only

For additional extras and an immediately available prototype please see Scorpion FT Hook Extras.

The first hooks will arrive by mid December, please place your orders in time so you can have your new hook before Christmas!

£119.90£249.90 £99.90£214.90 Select options
Sold
Weaver Adapter
Weaver Adapter
Weaver Adapter

Scope adapter for air pistols, converts a 12mm bore into a Weaver rail. The price stands for one piece!

£11.99 £8.99 Read More