Ball trigger with a 5 and an 8 mm ball on the two ends. Ball triggers are fine because you’ll always have the same trigger weight, but it’s a severe problem that you can’t feel the direction of the pull. If you ask me, you should rather choose a round trigger instead from my standard blades, it’s much better. This Ball trigger is available in Offset version, too.
Small horizontal trigger with pyramids on both sides (fine and coarse). Similar to the ball but you can feel the direction of the pull.
These blades have a big round surface that fits to the fingertip. There are four different surfaces, they look quite similar but each version gives a totally different feel on the trigger, so you can choose the one that fits to your shooting style the best.
‘Centre’ gives a d=2 mm sharp point in the middle, giving a very precise feedback of the actual pull weight, the edge gives only a small hint of the right pull direction.
‘Deep’ follows the shape of the fingertip, giving a comfortable and evenly distributed contact on the whole surface.
‘Edge’ is for those who are after the right pull direction, combined with a comfortable feeling of the deeper middle surface.
‘Flat’ feels like a flat surface, simple and precise.
Traditional straight and curved blades, 8mm wide, 20mm high surface with vertical grooves, the middle height is marked with a horizontal groove.
If you can’t find your hook here, don’t worry! Please contact me with your rifle details and I’ll design your own FolloWing Adapter. All versions come with appropriate stainless steel bolts and nuts and are ready to connect to your hook.
For more information please read the Product Description below.
If you need some spacers for your butt-hook, cheek piece or hamster, try the WonderBar adjustable spacers!
Precision offset trigger with wide range of adjustments, for the following rifles:
AirArms Pro-Target / EV-2 / FTP-900
Feinwerkbau (all models)
Walther (all models)
The trigger comes complete with a two-sided ‘pyramids’ trigger blade and now with a bonus blade of your choice. If you wish, you can order additional / other trigger blades here: FlexiPoint spare blades.
In most cases, it’s recommended to use the genuine FlexiPoint Trigger, because it connects more steady to the rifle action, using both trigger rods (German made rifles) or holding the rod by two grub screws (AirArms). But if you’ve got a custom stock that is too tight for the FlexiPoint trigger, a possible solution is to use a PinPoint trigger with this offset blade. For this option, simply choose PinPoint in ‘Adapter type’ drop-down menu.
If you’re after a simpler centre / small offset trigger, please have a look at PinPoint Trigger, too.
Magnifier for the parallax wheel, fully adjustable, with a lightweight and unbreakable 2x mag Fresnel lens. Visible lens size 12.5×38.5 mm. Fits to all major scopes, can be folded up for safe carrying. It can happen that you’ll need a stronger or weaker lens (depends on your eyesight), the frame can hold any flat lens up to 0.8 mm thickness or an acrylic lens that is cut to the right shape.
Ring sizes of the most common scopes:
Leupold Competition: 39-40 mm
March 80x, Nikko Mk1-2, BSA: 41-42 mm
S&B, Nikko Mk3, Sightron S-III: 42-43 mm
If you have got a rubber ‘scope enhancer’, you can choose the special ‘Enhancer’ version that is a flexible half cylinder and can be mounted on the rubber enhancer by two massive cable ties.
Check out its brother, too: EagleEye Clicks Magnifier: GET £5 OFF if buying an EagleEye Parallax and a Click magnifier together, using coupon code EAGLE-PAIR at checkout.
Adjustable angle scope pointer (10°–90° to the scope tube, two positions). Fits to all 1″ / 30 mm / 34 mm scope tubes, and needs only 10 mm space on the tube. The top is 11.5 mm above the tube in vertical pin position..
For parallax wheels and click turrets.
With stainless steel screws and steel pin. If you need a longer or shaped pin, you can simply replace the original pin with any <1mm wire.
Special edition of the good old FolloWing, for Feinwerkbau rifles. It replaces the two moveable parts of the butt-hook. The massive upper part hold the FolloWing extension, and gives a wide contact surface. The triangular lower part acts as a small butt-hook, and can hold a d=10 mm extension rod if needed. Wil fit to the original FWB butt-hook with a minor modification, but please contact me before ordering.