Save up to £30.00!
Gearbox Winding Forend
Gearbox Winding Forend
Gearbox Winding Forend

The forend you have always wanted:

  • Continuous height adjustment between 45-105mm
  • Just wind the handle, even while aiming
  • Self-locking in any position
  • For right and left handed use
  • Lightweight, only 170g / 290g (Original / Duplex)

If you are after something much bigger, made of metal and with traditional adjustments, check out our Rowan’s Forend + Gripster combination.

£99.99£169.99 Select options
Rowan’s Forend (+ Gripster)
Rowan’s Forend (+ Gripster)
Rowan’s Forend (+ Gripster)

Rowan Engineering’s industry standard forend mechanism with full range of the original adapters with an optional Gripster palm shelf, also allowing to connect the JOPA folding bipod (to the 6 or 7 indents versions).

Please allow a couple of days for dispatch this order.

If you are after a smaller and lighter mechanism but with some extra comfort, check out our Gearbox Winding Forend.

The hamster can be bought separately, too: Gripster hamster

£299.95 Add to basket
Save up to £10.00!
TrueLevel Adjustable Bubble Level
TrueLevel Adjustable Bubble Level
TrueLevel Adjustable Bubble Level

Get your rifle into a true level with these adjustable bubble level bases: you can fine tune its angle and eliminate canting effects.

It comes complete with a bubble level and connects:

  • to the rifle with a standard dovetail (10mm wide at the neck but the material is easy to carve if needed), or
  • to the scope with a 1″ / 30mm / 34mm ring.

Please check before buying that there is enough space for this part on your rifle. The rings need a 10mm wide spece on your scope tube, and the dovetail based unit requires at least 25mm above the top of the dovetail.

New updated ring design is available. The same function but a better looking ring, scope tube protection, bolt/nut secured against falling out.

£19.99£34.99 Select options
FlexiPoint Offset Trigger
FlexiPoint Offset Trigger
FlexiPoint Offset Trigger

Precision offset trigger with wide range of adjustments, for the following rifles:

  • Anschütz
  • AirArms Pro-Target / EV-2 / FTP-900
  • Feinwerkbau (all models)
  • Hämmerli AR-20
  • Steyr LG-100/110
  • Thomas
  • Walther (all models)

The trigger can be ordered with a wide variety of different trigger blades on a bundle price (they can be ordered later on full price here: FlexiPoint spare blades).

In most cases, it’s recommended to use the genuine FlexiPoint Trigger, because it connects more steady to the rifle action, using both trigger rods (German made rifles) or holding the rod by two grub screws (AirArms). But if you’ve got a custom stock that is too tight for the FlexiPoint trigger, a possible solution is to use a PinPoint trigger with this offset blade. For this option, simply choose PinPoint in ‘Adapter type’ drop-down menu.

If you’re after a simpler trigger which is in the centre or has only a small offset, please have a look at PinPoint v.2 Trigger, too.

£49.90 Add to basket
PinPoint v.2 Trigger
PinPoint v.2 Trigger
PinPoint v.2 Trigger

Precision trigger for the following rifles:

  • Anschütz
  • AirArms Pro-Target / EV-2 / FTP-900
  • Daystate Adjustable Trigger
  • Feinwerkbau (all models)
  • FX Impact
  • Hämmerli AR-20
  • Steyr LG-100/110
  • Suhl 150
  • Thomas
  • Walther (all models)

The trigger can be ordered with a wide variety of different trigger blades on a bundle price (they can be ordered later on full price here: FlexiPoint spare blades).

Offset 0-10mm to both sides. If you need a trigger with more offset (up to 46 mm!) and much more adjustment options, check out my Flexipoint trigger.

£39.90 Add to basket
FlexiPoint Spare Blades
FlexiPoint Spare Blades
FlexiPoint Spare Blades

These items are only spare parts for my trigger system (in black colour only), and allow you to try different surfaces and shapes to make sure, which one fits you the best in practice.

If you’d like to have a complete trigger, please click here: FlexiPoint offset trigger.

For detailed information please click on the tabs below:

Ball trigger with a 5 and an 8 mm ball on the two ends. Ball triggers are fine because you’ll always have the same trigger weight, but it’s a severe problem that you can’t feel the direction of the pull. If you ask me, you should rather choose a round trigger instead from my standard blades, it’s much better. This Ball trigger is available in Offset version, too.

FlexiPoint Blade - Ball 5-8 mm
FlexiPoint Blade – Ball 5-8 mm

Small horizontal trigger with pyramids on both sides (fine and coarse). Similar to the ball but you can feel the direction of the pull.

FlexiPoint Blade - Pyramids
FlexiPoint Blade – Pyramids

These blades have a big round surface that fits to the fingertip. There are four different surfaces, they look quite similar but each version gives a totally different feel on the trigger, so you can choose the one that fits to your shooting style the best.

  • ‘Centre’ gives a d=2 mm sharp point in the middle, giving a very precise feedback of the actual pull weight, the edge gives only a small hint of the right pull direction.
  • ‘Deep’ follows the shape of the fingertip, giving a comfortable and evenly distributed contact on the whole surface.
  • ‘Edge’ is for those who are after the right pull direction, combined with a comfortable feeling of the deeper middle surface.
  • ‘Flat’ feels like a flat surface, simple and precise.

FlexiPoint Blade - Round Centre
FlexiPoint Blade – Round Centre

FlexiPoint Blade - Round Deep
FlexiPoint Blade – Round Deep

FlexiPoint Blade - Round Edge
FlexiPoint Blade – Round Edge

FlexiPoint Blade - Round Flat
FlexiPoint Blade – Round Flat

Traditional straight and curved blades, 8mm wide, 20mm high surface with vertical grooves, the middle height is marked with a horizontal groove.

FlexiPoint Blade - Straight
FlexiPoint Blade – Straight

FlexiPoint Blade - Curved
FlexiPoint Blade – Curved



 

£3.99£4.99 View products