These items are only spare parts for my trigger system (in black colour only), and allow you to try different surfaces and shapes to make sure, which one fits you the best in practice.
Ball trigger with a 5 and an 8 mm ball on the two ends. Ball triggers are fine because you’ll always have the same trigger weight, but it’s a severe problem that you can’t feel the direction of the pull. If you ask me, you should rather choose a round trigger instead from my standard blades, it’s much better. This Ball trigger is available in Offset version, too.
FlexiPoint Blade – Ball 5-8 mm
Small horizontal trigger with pyramids on both sides (fine and coarse). Similar to the ball but you can feel the direction of the pull.
FlexiPoint Blade – Pyramids
These blades have a big round surface that fits to the fingertip. There are four different surfaces, they look quite similar but each version gives a totally different feel on the trigger, so you can choose the one that fits to your shooting style the best.
‘Centre’ gives a d=2 mm sharp point in the middle, giving a very precise feedback of the actual pull weight, the edge gives only a small hint of the right pull direction.
‘Deep’ follows the shape of the fingertip, giving a comfortable and evenly distributed contact on the whole surface.
‘Edge’ is for those who are after the right pull direction, combined with a comfortable feeling of the deeper middle surface.
‘Flat’ feels like a flat surface, simple and precise.
FlexiPoint Blade – Round Centre
FlexiPoint Blade – Round Deep
FlexiPoint Blade – Round Edge
FlexiPoint Blade – Round Flat
Traditional straight and curved blades, 8mm wide, 20mm high surface with vertical grooves, the middle height is marked with a horizontal groove.
The trigger can be ordered with a wide variety of different trigger blades on a bundle price (they can be ordered later on full price here: FlexiPoint spare blades).
Offset 0-10mm to both sides. If you need a trigger with more offset (up to 46 mm!) and much more adjustment options, check out my Flexipoint trigger.
Original wooden parts for FWB P70 Match/FT Alutec stock:
– Grip: R/H size L, with two threaded nuts at the bottom for mounting an additional palm shelf,
– Cheek piece: prone style (symmetric),
Colours: beech/red laminate.
All in good condition, with a few minor marks from usage, as seen on the photos.
Folding bipod, made of quality materials. Body: black or silver anodised aluminium alloy, legs: 5mm stainless steel with 20mm black plastic balls.
Long legs (12.5cm = 5″ between the ground and the rifle’s stock)
Fits to all rifles with standard accessory rail or similar (AirArms, Anschütz, Walther, Steyr, Feinwerkbau, Hämmerli etc.)
Sorry this product is discontinued but now I have two black ex demo pieces available, been used for a couple of competitions, photo sessions and as a demo when selling other ones on international competitions. In excellent condition, only with a few marks from being mounted onto a rifle. These are the very last ones of the JOPA series.
The FWB Anti-POI-Shift Kit stands of two laser sintered Nylon parts, they look the same but they’re a bit different inside:
One of them replaces the original A-clamp and holds only the cylinder and protects the barrel from accidental kicks but lets it free float.
The other one goes to the joint of the air cylinder and the reg. It can be fixed onto the barrel by two symmetrical grub screws that push small Nylon parts to the barrel and thus don’t scratch its surface.
With stainless steel screws, all secured against falling out. Easy mounting (you’ll have to drill only a 5 mm hole).
£99.90
Add to basket
£89.90
Select options
Reviews
There are no reviews yet.