- Please choose product options by visiting ComBrella shade for Combro.
SmartPin Adjustable Pointer
£14.99 – £43.99
Precisely adjustable pointer for reading the parallax wheels in different conditions. For temperature shifting scopes, light/dark environments, old eyes etc.
Fits 1″ / 30mm / 34mm / 36mm / 40mm scope tubes or 42-43 mm ocular tubes for shark fin wheels – and needs only 10×10 mm space in width and length as seen on the picture. With stainless steel screws and steel pins.
This pointer can be adjusted within 20 mm or 30 mm with a thumb screw, allowing precise and repeatable positioning of the pointer. The scale has 2 mm divisions. No need to fix and release, the pin has got some friction so it always stays where you set it with the screw, no accidental move (by your shooting jacket or rifle case).
The adjustable pointer comes with an additional pin 3 mm under the other one, for combining the effects (e.g. use the screw adjustment of the pointer to compensate scope temp shift and use the two pins for light and dark targets). If you need a longer or shaped pin, you can simply replace the original steel pins with any <1mm wire or paper clip.
New updated ring design is available. The same function but a better looking ring, scope tube protection, bolt/nut secured against falling out.
For more features and combinations with other scope ring features see Every Possible (And Impossible) Scope Ring Combination.
Additional information
Weight | 15 g |
---|---|
DIAMETER | 1" (25.4 mm), 30 mm, 34 mm, 36 mm, 40 mm, 42-43 mm |
SCALE LENGTH | Short (20 mm), Normal (30 mm) |
DESIGN | Old design, New design |
Only logged in customers who have purchased this product may leave a review.
Related Products
EasyPin Extra Pointer
Adjustable angle scope pointer (10°–90° to the scope tube, two positions). Fits 1″ / 30mm / 34mm / 36mm / 40mm scope tubes, and needs only 10 mm space on the tube. The top is 11.5 mm above the tube in vertical pin position..
For parallax wheels and click turrets.
With stainless steel screws and steel pin. If you need a longer or shaped pin, you can simply replace the original pin with any <1mm wire.
New updated ring design is available. The same function but a better looking ring, scope tube protection, bolt/nut secured against falling out.
The 30/34mm new design pointers are available in a ‘Target’ version i.e. with two pointers, one for the elevation turret and another on on the side for the windage turret.
For more features and combinations with other scope ring features see Every Possible (And Impossible) Scope Ring Combination.
PinPoint v.2 Trigger
Precision trigger for the following rifles:
- Anschütz
- AirArms Pro-Target / EV-2 / FTP-900
- Daystate Adjustable Trigger
- Feinwerkbau (all models)
- FX Impact
- Hämmerli AR-20
- Steyr LG-100/110
- Suhl 150
- Thomas
- Walther (all models)
The trigger can be ordered with a wide variety of different trigger blades on a bundle price (they can be ordered later on full price here: FlexiPoint spare blades).
Offset 0-10mm to both sides. If you need a trigger with more offset (up to 46 mm!) and much more adjustment options, check out my Flexipoint trigger.
Folding Windicator / Alligator Clip
Professional folding windicator with orange Nylon cord or alligator clips. Fits to any barrel or air cylinder (with the included adapter), 11mm dovetails, Picatinny/Weaver rails, standard UIT accessory rails, 1″ (25.4mm), 30mm and 34mm scope tubes.
The arm clicks into position when folded in or out (except for the scope ring versions). Ready to use with cable ties / bolts and cord, but of course you can replace the cord any time you like. Unbreakable, flexible, and only 7 grams. Made of high quality laser sintered Nylon, stainless steel nut and bolt.
NEW: also available with new design scope rings. For more features and combinations with other scope ring features see Every Possible (And Impossible) Scope Ring Combination.
NEW: all the windicators are available with alligator clips, too. See the options below.
FlexiPoint Offset Trigger
Precision offset trigger with wide range of adjustments, for the following rifles:
- Anschütz
- AirArms Pro-Target / EV-2 / FTP-900
- Feinwerkbau (all models)
- Hämmerli AR-20
- Steyr LG-100/110
- Thomas
- Walther (all models)
The trigger can be ordered with a wide variety of different trigger blades on a bundle price (they can be ordered later on full price here: FlexiPoint spare blades).
In most cases, it’s recommended to use the genuine FlexiPoint Trigger, because it connects more steady to the rifle action, using both trigger rods (German made rifles) or holding the rod by two grub screws (AirArms). But if you’ve got a custom stock that is too tight for the FlexiPoint trigger, a possible solution is to use a PinPoint trigger with this offset blade. For this option, simply choose PinPoint in ‘Adapter type’ drop-down menu.
If you’re after a simpler trigger which is in the centre or has only a small offset, please have a look at PinPoint v.2 Trigger, too.
Composite Parallax Wheel
Stylish and professional scope parallax wheels, high quality laser sintered Nylon front with grooves at the edge, 12mm wide surface for your distance marks, leaves no mark on your scope.
- Composite Parallax Wheels: 82mm round, 125mm and 150mm DualCore (round centered/excentric), 229mm effective diameter comma wheel.
- Composite Click Turret: 54 mm oversized turret, resettable without tool, wit or without bottoming ring.
- Composite Zoom Lever: stylish and handy zoom lever.
- All three in a bundle on a reduced price: Composite Scope Kit
Please note that if your scope has a reticle illumination switch at the end of the parallax knob, its access may be partially or entirely blocked. Always contact me before placing your order so that we can discuss compatibility.
Composite Click Turret
Stylish and professional oversized click turret, high quality laser sintered Nylon top with a massive grip. Easy re-setting without tools, internal cogs to keep the zero setting, 54mm outer diameter, 21mm high space for your click marks, bottoming function (on compatible scopes), mounts directly onto the existing turrets (except Falcon T models), leaves no mark on your scope.
- Composite Parallax Wheels: 82mm round, 125mm and 150mm DualCore (round centered/excentric), 229mm effective diameter comma wheel.
- Composite Click Turret: 54 mm oversized turret, resettable without tool, wit or without bottoming ring.
- Composite Zoom Lever: stylish and handy zoom lever.
- All three in a bundle on a reduced price: Composite Scope Kit
FWB Anti-POI-Shift Kit
The FWB Anti-POI-Shift Kit stands of two laser sintered Nylon parts, they look the same but they’re a bit different inside:
- One of them replaces the original A-clamp and holds only the cylinder and protects the barrel from accidental kicks but lets it free float.
- The other one goes to the joint of the air cylinder and the reg. It can be fixed onto the barrel by two symmetrical grub screws that push small Nylon parts to the barrel and thus don’t scratch its surface.
With stainless steel screws, all secured against falling out. Easy mounting (you’ll have to drill only a 5 mm hole).
For a perfect solution please see also: FWB Anti-POI-Shift Rail
MicroLevel Adapter For Sightron S-III
Adapter for using MicroLevel electronic level indicator on Sightron S-III scopes with reticle illumination.
It can be mounted on the ocular tube, the tapered end goes into the MicroLevel’s rubber ring and has got grooves for the cable tie fixing. The inside will remain matte black for reducing light reflections. Four different lengths, by cutting off one or more rings from the end, each cut shortens it by 6 mm.
For more info please contact me.
Reviews
There are no reviews yet.