GAPacity Sidewheel
GAPacity Sidewheel
GAPacity Sidewheel

This wheel has got a special feature: all the gaps are nearly the same between 32-50 m (35-55 yds), every 5 m distance equals a 8-10 mm gap on the wheel. The big hole at the end is comfortable to adjust the wheel, also the other big hole can be used for quick adjustments.

There is a mark on the wheel, you have to mount the sidewheel in a way that this mark goes to the 50 m (55 yds) distance. After this, if you mark the other distances, you will find that all the longer distances are distributed evenly and with nice big gaps (depending your eyesight and rangefinding technique, minor differences may occur).

The sidewheel comes in a bundle with my SmartPin Long Scale / Linear adjustable pointer. Compatible scopes are Big Nikko MK1-2-3, Sightron S-III, Falcon T series, Leapers Accushot, Leupold Competition and S&B FT/PM-II at the moment, but I can design your own GAPacity wheel version for your scope.

Made of strong laser sintered Nylon or UV-stable ASA polymer, with stainless steel screws.

Please note that although the wheels are marked as “in stock”, dispatch time is usually 2-3 days.

£49.99£89.99 Select options
DualCore Sidewheel
DualCore Sidewheel
DualCore Sidewheel

A unique parallax wheel with two centres: can be used in centered or in excentric position, wide space for the scale, strong and unbreakable. See the details at the bottom on the page.

This sidewheel has been designed on a way, that it will fit to the scope and to my EasyPin pointer / MultiPin / SmartPin and ProTurret Click Knob as well. If you order only a sidewheel, please make sure that it does not clash with the third party accessories. If you have any questions, please contact me before placing an order.

The pointers fit perfectly to my sidewheel, I recommend to buy them together. The ring size will be automatically selected according to your scope’s tube diameter. If you want me to send a pointer with an extended scale (10 mm more travel for the pin/stripe), please select your pointer type here and add 5 pounds to the order by using the Additional Payment page.

Made of strong laser sintered Nylon or UV-stable ASA polymer, with stainless steel screws.

Please note that although the wheels are marked as “in stock”, dispatch time is usually 2-3 days.

£69.99£144.99 Select options
Save up to £15.00!
SmartPin Adjustable Pointer
SmartPin Adjustable Pointer
SmartPin Adjustable Pointer

Precisely adjustable pointer for reading the parallax wheels in different conditions. For temperature shifting scopes, light/dark environments, old eyes etc.

Fits to all 1″ / 30 mm / 34 mm scope tubes or 42-43 mm ocular tubes for sharkfin wheels – and needs only 10×10 mm space in width and length as seen on the picture. With stainless steel screws and steel pins.

This pointer can be adjusted within 20 mm or 30 mm with a thumb screw, allowing precise and repeatable positioning of the pointer. The scale has got 2 mm divisions. No need to fix and release, the pin has got some friction so it always stays where you set it with the screw, no accidental move (by your shooting jacket or rifle case).

The adjustable pointer comes with an additional pin 3 mm under the other one, for combining the effects (e.g. use the screw adjustment of the pointer to compensate scope temp shift and use the two pins for light and dark targets). If you need a longer or shaped pin, you can simply replace the original steel pins with any <1mm wire or paper clip.

Find out which pointer suits you best: Scope Pointer Comparison Table

Another variation for excentric or shaped sidewheels: SmartPin Linear

£29.99£34.99 £14.99£34.99 Select options
Save up to £15.00!
SmartPin Linear Pointer
SmartPin Linear Pointer
SmartPin Linear Pointer

Precisely adjustable linear pointer for reading the parallax wheels in different conditions. For temperature shifting scopes, light/dark environments, old eyes etc.

Fits to all 1″ / 30 mm / 34 mm scope tubes or 42-43 mm ocular tubes – and needs only 22×12.4 mm space in width and length as seen on the picture. With stainless steel screws.

This pointer height can be adjusted within 15 mm or 25 mm (new!) with a thumb screw, allowing precise and repeatable positioning of the pointer. The scale has got 2 mm divisions. No need to fix and release, the pin has got some friction so it always stays where you set it with the screw, no accidental move (by your shooting jacket or rifle case).

The linear adjustable pointer comes with a thin Nylon strip that is very easy to cut, it is suggested to cut to the right shape with a sharp blade and use it as a template for making a metal plate as a final pointer.

Another variation for standard sidewheels: SmartPin Adjustable Pointer

£34.99£39.99 £19.99£39.99 Select options
Save up to £5.00!
SmartPin Extra S&B + EEC
SmartPin Extra S&B + EEC
SmartPin Extra S&B + EEC

This is a special version of the SmartPin Adjustable Pointer, designed to correct the huge temp shift of the Schmidt&Bender 12.5-50×56 FT scope. Optionally with a special version of the EagleEye Clicks magnifier (with acrylic lens in it). More information in this blog post: SmartPin Extra: S&B + EEC

Scope tube diameter 30 mm, colour Black Velvet.

Check out this, too: EagleEye Parallax Magnifier: GET £5 OFF if buying an EagleEye Parallax magnifier together with this product, using coupon code EAGLE-SMART at checkout.

£39.99£59.99 £34.99£59.99 Select options