Additional information
Weight | 30 g |
---|
£49.90
Adapter for using MicroLevel electronic level indicator on Sightron S-III scopes with reticle illumination.
It can be mounted on the ocular tube, the tapered end goes into the MicroLevel’s rubber ring and has got grooves for the cable tie fixing. The inside will remain matte black for reducing light reflections. Four different lengths, by cutting off one or more rings from the end, each cut shortens it by 6 mm.
For more info please contact me.
Available on back-order
Weight | 30 g |
---|
Only logged in customers who have purchased this product may leave a review.
Precisely adjustable pointer for reading the parallax wheels in different conditions. For temperature shifting scopes, light/dark environments, old eyes etc.
Fits 1″ / 30mm / 34mm / 36mm / 40mm scope tubes or 42-43 mm ocular tubes for shark fin wheels – and needs only 10×10 mm space in width and length as seen on the picture. With stainless steel screws and steel pins.
This pointer can be adjusted within 20 mm or 30 mm with a thumb screw, allowing precise and repeatable positioning of the pointer. The scale has 2 mm divisions. No need to fix and release, the pin has got some friction so it always stays where you set it with the screw, no accidental move (by your shooting jacket or rifle case).
The adjustable pointer comes with an additional pin 3 mm under the other one, for combining the effects (e.g. use the screw adjustment of the pointer to compensate scope temp shift and use the two pins for light and dark targets). If you need a longer or shaped pin, you can simply replace the original steel pins with any <1mm wire or paper clip.
New updated ring design is available. The same function but a better looking ring, scope tube protection, bolt/nut secured against falling out.
For more features and combinations with other scope ring features see Every Possible (And Impossible) Scope Ring Combination.
A professional scope turret: resettable without any tool, adjustable bottoming ring, pellet holder, big diameter (54 mm). See the details at the bottom on the page.
This turret has been designed on a way, that it will fit to the scope and to my EasyPin Extra pointer and DualCore sidewheel as well. If you order only a turret, please make sure that it does not clash with the third party accessories. If you have any questions, please contact me before placing an order. For Sightron S-III scopes please check your turret type (target/tactical, see the pictures on the left).
About the “Bottoming” option: if your scope turrets go slowly in and out when you click, I’d suggest to choose the “bottoming” version, with this you can always set your clicks back to the top of the trajectory and won’t be ‘one turn out’ accidentally. If the turrets keep their height while rotated, then always select “simple” (March, Hawke Airmax, S&B for example).
The pointer fits perfectly to my turret, I recommend to buy them together (you’ll get the pointer on a bundle price). The ring size will be automatically selected according to your scope’s tube diameter.
Made of strong UV-stable ASA polymer (the outer drum professionally polished), with stainless steel screws. The pellet holder at the top is printed from a rubber-like material.
All these turrets are in stock but please note that these are the last ones, this product will be discontinued.
Check out the new design, the Composite series:
A unique parallax wheel with two centres: can be used in centered or in excentric position, wide space for the scale, strong and unbreakable. See the details at the bottom on the page.
This sidewheel has been designed on a way, that it will fit to the scope and to my SmartPin Pointer and ProTurret Click Knob as well. If you order only a sidewheel, please make sure that it does not clash with the third party accessories. If you have any questions, please contact me before placing an order.
The pointers fit perfectly to my sidewheel. The ring size will be automatically selected according to your scope’s tube diameter. If you want me to send a pointer with an extended scale (10 mm more travel for the pin/stripe), please select your pointer type here and add 5 pounds to the order by using the Additional Payment page.
Made of strong UV-stable ASA polymer (professionally polished), with stainless steel screws. Please note that I have slightly modified the design, certain wheels may differ in smaller details compared to the photos.
This product has been discontinued, check out the new design, the Composite series:
Stylish and professional scope parallax wheels, high quality laser sintered Nylon front with grooves at the edge, 12mm wide surface for your distance marks, leaves no mark on your scope.
Please note that if your scope has a reticle illumination switch at the end of the parallax knob, its access may be partially or entirely blocked. Always contact me before placing your order so that we can discuss compatibility.
A simple and streamlined design for those who want something more professional than those cheap fishing coasters. This zoom lever is worthy of your scopes and of the other Maestro Design accessories on your scope.
Fits to many scope models. 12 mm thick, lightweight, comfortable and sure grip in all conditions. Made of strong laser sintered Nylon or UV-stable ASA or PLA/PHA polymer (polished), with stainless steel screws.
All these zoom levers are in stock but please note that these are the last ones, this product has been discontinued.
Check out the new design, the Composite series:
This is a unique product that allows you to combine Maestro Design’s new updated ring design scope parts in every possible (and impossible) combination:
PLEASE NOTE that it’s your responsibility to carefully consider how the desired combination would work on your scope, where can you put it, will it not clash with other parts, is there enough space for the folding arm etc. If you are not sure please CONTACT ME before placing an order.
Most combinations are in stock but I can not guarantee this. If you need it urgently, please contact me before ordering to find out whether your combination is available.
Made of high quality laser sintered Nylon with stainless steel nuts and bolts.
Experimental project:…
Coloured versions of the FT industrial standard SmartPin Adjustable Pointer.
The usual quality laser sintered Nylon parts just in another colours.
There is only one from each colour (Red, Green, Blue and Yellow) with the following parameters:
Have fun! :-)
Stylish and professional oversized click turret, high quality laser sintered Nylon top with a massive grip. Easy re-setting without tools, internal cogs to keep the zero setting, 54mm outer diameter, 21mm high space for your click marks, bottoming function (on compatible scopes), mounts directly onto the existing turrets (except Falcon T models), leaves no mark on your scope.
Brand New Falcon X50 FT Scope + Complete kit of Composite Wheel / Click / Zoom accessories on a bundle price!
10 year warranty against defects in materials and workmanship.
Shipping within 1 week, with all accessories mounted.
Simple and lightweight scope pointer. Fits to all 1″ / 30 mm / 34 mm scope tubes, and needs only 10×10 mm space in width and length as seen on the picture.
For 36mm and 40mm tube diameters see EasyPin Extra
For click turrets with a custom made cap, or for sidewheels. With stainless steel screws and steel pin. If you need a longer or shaped pin, you can simply replace the original pin with any <1mm wire. Find out which pointer suits you best: Scope Pointer Comparison Table
NEW: there is an advanced version of this pointer available, too, with adjustable pin angle and also for 36mm and 40mm scope tubes: EasyPin Extra Scope Pointer
Magnifier for the parallax wheel, fully adjustable, with a lightweight and unbreakable Fresnel lens. Visible lens size 12.5×38.5 mm. Fits to all major scopes, can be folded up for safe carrying.
Please understand that it can happen that you’ll need a stronger or weaker lens (depends on your eyesight), the frame can hold any flat lens up to 0.8 mm thickness or an acrylic lens that is cut to the right shape.
If you have got a rubber ‘scope enhancer’, you can choose the special ‘Enhancer’ version that is a flexible half cylinder and can be mounted on the rubber enhancer by two massive cable ties.
Check out my new clicks magnifier, too: EagleEye Clicks Magnifier.
New updated ring design: The same function but a much wider adjustment range (40-45mm or 42-47mm) and a better looking ring, ocular tube protection, bolt/nut secured against falling out.
* SALE Scorpion MK4 * NEW Scorpion MK5 * NEW Ocular Tube Pointers * Dismiss
Reviews
There are no reviews yet.