GAPacity Sidewheel
GAPacity Sidewheel
GAPacity Sidewheel

This wheel has got a special feature: all the gaps are nearly the same between 32-50 m (35-55 yds), every 5 m distance equals a 8-10 mm gap on the wheel. The big hole at the end is comfortable to adjust the wheel, also the other big hole can be used for quick adjustments.

There is a mark on the wheel, you have to mount the sidewheel in a way that this mark goes to the 50 m (55 yds) distance. After this, if you mark the other distances, you will find that all the longer distances are distributed evenly and with nice big gaps (depending your eyesight and rangefinding technique, minor differences may occur).

The sidewheel comes in a bundle with my SmartPin Long Scale / Linear adjustable pointer. Compatible scopes are Big Nikko MK1-2-3, Sightron S-III, Falcon T series, Leapers Accushot, Leupold Competition and S&B FT/PM-II at the moment, but I can design your own GAPacity wheel version for your scope.

Made of strong laser sintered Nylon or UV-stable ASA polymer, with stainless steel screws.

Please note that although the wheels are marked as “in stock”, dispatch time is usually 2-3 days.

£49.99£89.99

In stock

Select options
MicroLevel Adapter For Sightron S-III
MicroLevel Adapter For Sightron S-III
MicroLevel Adapter For Sightron S-III

Adapter for using MicroLevel electronic level indicator on Sightron S-III scopes with reticle illumination.

It can be mounted on the ocular tube, the tapered end goes into the MicroLevel’s rubber ring and has got grooves for the cable tie fixing. The inside will remain matte black for reducing light reflections. Four different lengths, by cutting off one or more rings from the end, each cut shortens it by 6 mm.

For more info please contact me.

£49.90

Available (allow a few weeks)

Add to basket
Low magnification
Simple and streamlined shape
ZoomR Magnification Lever

A simple and streamlined design for those who want something more professional than those cheap fishing coasters. This zoom lever is worthy of your scopes and of the other Maestro Design accessories on your scope.

Fits to many scope models, and of course I can design your own ZoomR version for your scope. 12 mm thick, lightweight, comfortable and sure grip in all conditions. Made of strong laser sintered Nylon or UV-stable ASA polymer, with stainless steel screws.

£29.99£39.99

In stock

Select options
DualCore Sidewheel
DualCore Sidewheel
DualCore Sidewheel

A unique parallax wheel with two centres: can be used in centered or in excentric position, wide space for the scale, strong and unbreakable. See the details at the bottom on the page.

This sidewheel has been designed on a way, that it will fit to the scope and to my EasyPin pointer / MultiPin / SmartPin and ProTurret Click Knob as well. If you order only a sidewheel, please make sure that it does not clash with the third party accessories. If you have any questions, please contact me before placing an order.

The pointers fit perfectly to my sidewheel, I recommend to buy them together. The ring size will be automatically selected according to your scope’s tube diameter. If you want me to send a pointer with an extended scale (10 mm more travel for the pin/stripe), please select your pointer type here and add 5 pounds to the order by using the Additional Payment page.

Made of strong UV-stable ASA polymer, with stainless steel screws. Please note that I have slightly modified the design, certain wheels may differ in smaller details compared to the photos.

Please note that although the wheels are marked as “in stock”, dispatch time is usually 2-3 days.

£109.99£144.99

In stock

Select options
ProTurret Click Knob
ProTurret Click Knob
ProTurret Click Knob

A professional scope turret: resettable without any tool, adjustable bottoming ring, pellet holder, big diameter (54 mm). See the details at the bottom on the page.

This turret has been designed on a way, that it will fit to the scope and to my  EasyPin Extra pointer and DualCore sidewheel as well. If you order only a turret, please make sure that it does not clash with the third party accessories. If you have any questions, please contact me before placing an order. For Sightron S-III scopes please check your turret type (target/tactical, see the pictures on the left).

About the “Bottoming” option: if your scope turrets go slowly in and out when you click, I’d suggest to choose the “bottoming” version, with this you can always set your clicks back to the top of the trajectory and won’t be ‘one turn out’ accidentally. If the turrets keep their height while rotated, then always select “simple” (March, Hawke Airmax, S&B for example).

The pointer fits perfectly to my turret, I recommend to buy them together (you’ll get the pointer on a bundle price). The ring size will be automatically selected according to your scope’s tube diameter.

Made of strong laser sintered Nylon or UV-stable ASA polymer, with stainless steel screws. The pellet holder at the top is printed from a rubber-like material on the newer versions.

Please note that although the wheels are marked as “in stock”, dispatch time is usually 2-3 days.

£49.99£79.99

In stock

Select options
Save up to £15.00!
SmartPin adjustable scope pointer
SmartPin Adjustable Pointer
SmartPin Adjustable Pointer

Precisely adjustable pointer for reading the parallax wheels in different conditions. For temperature shifting scopes, light/dark environments, old eyes etc.

Fits to all 1″ / 30 mm / 34 mm scope tubes or 42-43 mm ocular tubes for sharkfin wheels – and needs only 10×10 mm space in width and length as seen on the picture. With stainless steel screws and steel pins.

This pointer can be adjusted within 20 mm or 30 mm with a thumb screw, allowing precise and repeatable positioning of the pointer. The scale has got 2 mm divisions. No need to fix and release, the pin has got some friction so it always stays where you set it with the screw, no accidental move (by your shooting jacket or rifle case).

The adjustable pointer comes with an additional pin 3 mm under the other one, for combining the effects (e.g. use the screw adjustment of the pointer to compensate scope temp shift and use the two pins for light and dark targets). If you need a longer or shaped pin, you can simply replace the original steel pins with any <1mm wire or paper clip.

Find out which pointer suits you best: Scope Pointer Comparison Table

Another variation for excentric or shaped sidewheels: SmartPin Linear

£14.99£34.99

In stock

Select options
Save up to £15.00!
SmartPin Linear scope pointer
Using with an excentric wheel
SmartPin Linear Pointer

Precisely adjustable linear pointer for reading the parallax wheels in different conditions. For temperature shifting scopes, light/dark environments, old eyes etc.

Fits to all 1″ / 30 mm / 34 mm scope tubes or 42-43 mm ocular tubes – and needs only 22×12.4 mm space in width and length as seen on the picture. With stainless steel screws.

This pointer height can be adjusted within 15 mm or 25 mm (new!) with a thumb screw, allowing precise and repeatable positioning of the pointer. The scale has got 2 mm divisions. No need to fix and release, the pin has got some friction so it always stays where you set it with the screw, no accidental move (by your shooting jacket or rifle case).

The linear adjustable pointer comes with a thin Nylon strip that is very easy to cut, it is suggested to cut to the right shape with a sharp blade and use it as a template for making a metal plate as a final pointer.

Another variation for standard sidewheels: SmartPin Adjustable Pointer

£19.99£39.99 Select options
Save up to £9.00!
Multipin multiple scope pointer
MultiPin – general view
MultiPin Scope Pointer

Multiple scope pointer for rangefinding in different environmental conditions. For temperature shifting scopes, light/dark environments, old eyes etc.

Fits to all 1″ / 30 mm / 34 mm scope tubes, and needs only 10×10 mm space in width and length as seen on the picture. With stainless steel screws.

This pointer has got 5 steel pins, 5 mm distances, covering a 20 mm range. You can remove any of them independently, and if you need a longer or shaped pin, you can simply replace the original pins with any <1mm wire.

Find out which pointer suits you best: Scope Pointer Comparison Table

£9.99£18.99 Select options
EasyPin Extra Scope Pointer
EasyPin Extra Scope Pointer
EasyPin Extra Scope Pointer

Adjustable angle scope pointer (10°–90° to the scope tube, two positions). Fits to all 1″ / 30 mm / 34 mm scope tubes, and needs only 10 mm space on the tube. The top is 11.5 mm above the tube in vertical pin position..

For parallax wheels and click turrets.

With stainless steel screws and steel pin. If you need a longer or shaped pin, you can simply replace the original pin with any <1mm wire.

New product!

£19.99 Select options
EasyPin scope pointer
EasyPin – general view
EasyPin Scope Pointer

Simple and lightweight scope pointer. Fits to all 1″ / 30 mm / 34 mm scope tubes, and needs only 10×10 mm space in width and length as seen on the picture.

For click turrets with a custom made cap, or for sidewheels.

With stainless steel screws and steel pin. If you need a longer or shaped pin, you can simply replace the original pin with any <1mm wire.

Find out which pointer suits you best: Scope Pointer Comparison Table

NEW: there is an advanced version of this pointer available, too, with adjustable pin angle: EasyPin Extra Scope Pointer

£14.99 Select options
Fully adjustable window position
EagleEye Parallax & Click scope magnifiers
EagleEye Parallax Magnifier

Magnifier for the parallax wheel, fully adjustable, with a lightweight and unbreakable 2x mag Fresnel lens. Visible lens size 12.5×38.5 mm. Fits to all major scopes, can be folded up for safe carrying. It can happen that you’ll need a stronger or weaker lens (depends on your eyesight), the frame can hold any flat lens up to 0.8 mm thickness or an acrylic lens that is cut to the right shape.

Ocular tube sizes of the most common scopes:

  • Leupold Competition: 39.5 mm
  • March 80x: 41.1 mm
  • Nikko Mk1-2, BSA: 42 mm
  • S&B FT, Nikko Mk3: 42.5 mm
  • Sightron S-III: 42.6 mm

If you have got a rubber ‘scope enhancer’, you can choose a special adapter that is a flexible half cylinder and can be mounted on the rubber enhancer by two massive cable ties.

Check out its brother, too: EagleEye Clicks Magnifier: GET £5 OFF if buying an EagleEye Parallax and a Click magnifier together, using coupon code EAGLE-PAIR at checkout.

£29.99 Select options