Which Trigger Fits You Best?

My triggers are compatible with the following rifles:

• AirArms (ProTarget, EV-2, FTP-900)
• Anschütz (8002, 9003)
• Feinwerkbau (P600 series, P70, P700, P800)
• Hämmerli (AR-20)
• Steyr (LG-100, LG-110)
• Walther (LGM-2, LG-210, LG-300)

Which trigger is the best for you? Have a look at the following short descriptions. More photos and information on the links below.

PinPoint Trigger — This is a simple but effective trigger, can be set to the centre or to 9.6 mm offset. Lightweight and It comes with a Pyramids trigger blade, and a wide variety of additional trigger blades can be selected. This is a cheap and simple trigger, but with a lot of benefits, as the stabile pull weight, the feel of the direction of pull, warm contact surface.

FlexiPoint Offset Trigger — A very versatile trigger, the blade can be set in height, length, can be rotated and can have an offset from 0 to 46 mm. Also additional trigger blades are available. This trigger really can be set to the right position, can be used with offset grips, too. The main difference, compared to the PinPoint trigger is the height adjustment and the offset features.

PinPoint Standard Trigger Blades — Different surfaces for different trigger finger sensitivity: grooves, ridges, flat shapes with edges etc. Every blade has two different sides, with a fine and a coarse version of its surface pattern.

PinPoint Special Trigger Blades — Ball trigger, Offset triggers (Pyramids, Ball and Round), Vertical trigger blade, FlexiArm. The offset blades and FlexiArm can be useful if a custom made wooden stock is too tight for the complete FlexiPoint trigger.

FlexiPoint Spare Blades — Pyramids, Ball and four variations of Round trigger blade (Centre, Deep, Edge and Flat). Btw, I’m using the Round Edge version on my rifle.

Use the coupon code TRITHP at checkout to get 30% discount on all triggers and trigger blades until 9th November!