After many years of experimenting with trigger blades, I designed a special one that really meets the FT shooters’ requirements. These trigger blades have standard sizes, allowing you to use a 0 or 9.6 mm offset for the trigger.
Advantages of PinPoint triggers
Extremely precise trigger control
Wide range of surfaces (pyramids, grooves, ridges, flat shapes etc.)
Two sides with a coarse and a fine variation of the chosen surface
Warm surface, extremely good for winter competitions
Horizontal design so it gives always the same trigger weight
Wide flat surface that gives the sure feel of the pulling direction
Brings the firing point back to the symmetry plane
Or rotated with 180° gives an offset of 9.6 mm
PinPoint trigger system is compatible with the following rifles:
If you can’t find your hook here, don’t worry! Please contact me with your rifle details and I’ll design your own FolloWing Adapter. All versions come with appropriate stainless steel bolts and nuts and are ready to connect to your hook.
For more information please read the Product Description below.
If you need some spacers for your butt-hook, cheek piece or hamster, try the WonderBar adjustable spacers!
High quality scope rail, designed especially to work together with my FWB Anti-POI-Shift Kit, using these products together eliminates the POI-shifts on Feinwerkbau Alutec stocks. I’ve been using the same solution on my rifle, and zeroed my rifle last time in 2012, need to tell anything more?!?
Made of aircraft grade aluminium alloy, natural alu anodising, elevation 35 mm, reproduces the same dovetail on the top as the FWB’s original dovetail. Default slope is 0.71% = 24.4 MOA.
Magnifier for the clicks turret, fully adjustable, with a lightweight and unbreakable 3x mag Fresnel lens. Visible lens size 28×17 mm. Fits to all 1″ / 30 mm / 34 mm scope tubes. It can happen that you’ll need a stronger or weaker lens (depends on your eyesight), the frame can hold any flat lens up to 0.8 mm thickness or an acrylic lens that is cut to the right shape.
Check out its brother, too: EagleEye Parallax Magnifier: GET £5 OFF if buying an EagleEye Parallax and a Click magnifier together, using coupon code EAGLE-PAIR at checkout.
Prototype version of the popular EagleEye Parallax Magnifier. Adjustable height and distance form the scope body. May be useful for front parallax scopes, mounted onto the top of the scope, or for side parallax scopes if you don’t mind the lack of the folding mechanism.
In good condition, as seen on the photos but with white cable ties.
Ball trigger with a 5 and an 8 mm ball on the two ends. Ball triggers are fine because you’ll always have the same trigger weight, but it’s a severe problem that you can’t feel the direction of the pull. If you ask me, you should rather choose a round trigger instead from my standard blades, it’s much better. This Ball trigger is available in Offset version, too.
Small horizontal trigger with pyramids on both sides (fine and coarse). Similar to the ball but you can feel the direction of the pull.
These blades have a big round surface that fits to the fingertip. There are four different surfaces, they look quite similar but each version gives a totally different feel on the trigger, so you can choose the one that fits to your shooting style the best.
‘Centre’ gives a d=2 mm sharp point in the middle, giving a very precise feedback of the actual pull weight, the edge gives only a small hint of the right pull direction.
‘Deep’ follows the shape of the fingertip, giving a comfortable and evenly distributed contact on the whole surface.
‘Edge’ is for those who are after the right pull direction, combined with a comfortable feeling of the deeper middle surface.
‘Flat’ feels like a flat surface, simple and precise.
Traditional straight and curved blades, 8mm wide, 20mm high surface with vertical grooves, the middle height is marked with a horizontal groove.
A traditional version of the FWB Anti-POI-Shift Kit, made of aluminium:
One of them replaces the original A-clamp and holds only the cylinder. It has a plastic insert to protect the cylinder surface.
The other one is a modified A-clamp, it goes to the joint of the air cylinder and the reg. It holds the barrel and has 3 threaded holes in the bottom for precise positioning, and both sides are milled to reduce the possible torque on the barrel.
With stainless steel screws. Easy mounting (you’ll have to drill only a 5 mm hole). With smaller usage marks but in perfect working condition.