- "SCOPE MODEL" is a required field.
- "RING COLOUR" is a required field.
SmartPin Adjustable Pointer
£14.99 – £43.99
Precisely adjustable pointer for reading the parallax wheels in different conditions. For temperature shifting scopes, light/dark environments, old eyes etc.
Fits 1″ / 30mm / 34mm / 36mm / 40mm scope tubes or 42-43 mm ocular tubes for shark fin wheels – and needs only 10×10 mm space in width and length as seen on the picture. With stainless steel screws and steel pins.
This pointer can be adjusted within 20 mm or 30 mm with a thumb screw, allowing precise and repeatable positioning of the pointer. The scale has 2 mm divisions. No need to fix and release, the pin has got some friction so it always stays where you set it with the screw, no accidental move (by your shooting jacket or rifle case).
The adjustable pointer comes with an additional pin 3 mm under the other one, for combining the effects (e.g. use the screw adjustment of the pointer to compensate scope temp shift and use the two pins for light and dark targets). If you need a longer or shaped pin, you can simply replace the original steel pins with any <1mm wire or paper clip.
New updated ring design is available. The same function but a better looking ring, scope tube protection, bolt/nut secured against falling out.
For more features and combinations with other scope ring features see Every Possible (And Impossible) Scope Ring Combination.
Additional information
Weight | 15 g |
---|---|
DIAMETER | 1" (25.4 mm), 30 mm, 34 mm, 36 mm, 40 mm, 42-43 mm |
SCALE LENGTH | Short (20 mm), Normal (30 mm) |
DESIGN | Old design, New design |
Only logged in customers who have purchased this product may leave a review.
Related Products
Folding Windicator / Alligator Clip
Professional folding windicator with orange Nylon cord or alligator clips. Fits to any barrel or air cylinder (with the included adapter), 11mm dovetails, Picatinny/Weaver rails, standard UIT accessory rails, 1″ (25.4mm), 30mm and 34mm scope tubes.
The arm clicks into position when folded in or out (except for the scope ring versions). Ready to use with cable ties / bolts and cord, but of course you can replace the cord any time you like. Unbreakable, flexible, and only 7 grams. Made of high quality laser sintered Nylon, stainless steel nut and bolt.
NEW: also available with new design scope rings. For more features and combinations with other scope ring features see Every Possible (And Impossible) Scope Ring Combination.
NEW: all the windicators are available with alligator clips, too. See the options below.
Anti-POI-Shift Rail (for Feinwerkbau / Anschütz)
High quality scope rail for Feinwerkbau or Anschütz PCP rifles. Designed especially to work together with my FWB Anti-POI-Shift Kit, using these products together eliminates the POI-shifts on Feinwerkbau Alutec stocks. I’ve been using the same solution on my rifle, and the last time I zeroed my rifle was in 2012, need to tell anything more?!?
Made of aircraft grade aluminium alloy, black anodised with stainless steel bolts or silver anodised with black bolts. Elevation 35 mm, reproduces the same dovetail on the top as the rifle’s original dovetail. The in-built slope is 0.71% = 24.4 MOA so any simple mount ring will do without shimming.
For a perfect solution please see also: FWB Anti-POI-Shift Kit.
ProTurret Click Knob + EasyPin Pointer
A professional scope turret: resettable without any tool, adjustable bottoming ring, pellet holder, big diameter (54 mm). See the details at the bottom on the page.
This turret has been designed on a way, that it will fit to the scope and to my EasyPin Extra pointer and DualCore sidewheel as well. If you order only a turret, please make sure that it does not clash with the third party accessories. If you have any questions, please contact me before placing an order. For Sightron S-III scopes please check your turret type (target/tactical, see the pictures on the left).
About the “Bottoming” option: if your scope turrets go slowly in and out when you click, I’d suggest to choose the “bottoming” version, with this you can always set your clicks back to the top of the trajectory and won’t be ‘one turn out’ accidentally. If the turrets keep their height while rotated, then always select “simple” (March, Hawke Airmax, S&B for example).
The pointer fits perfectly to my turret, I recommend to buy them together (you’ll get the pointer on a bundle price). The ring size will be automatically selected according to your scope’s tube diameter.
Made of strong UV-stable ASA polymer (the outer drum professionally polished), with stainless steel screws. The pellet holder at the top is printed from a rubber-like material.
All these turrets are in stock but please note that these are the last ones, this product will be discontinued.
Check out the new design, the Composite series:
- Composite Parallax Wheels: 125mm and 150mm DualCore (round centered/excentric), 225mm effective diameter comma wheel.
- Composite Click Turret: 54 mm oversized turret, resettable without tool, wit or without bottoming ring.
- Composite Zoom Lever: stylish and handy zoom lever.
- All three in a bundle on a reduced price: Composite Scope Kit
FWB Anti-POI-Shift Kit
The FWB Anti-POI-Shift Kit stands of two laser sintered Nylon parts, they look the same but they’re a bit different inside:
- One of them replaces the original A-clamp and holds only the cylinder and protects the barrel from accidental kicks but lets it free float.
- The other one goes to the joint of the air cylinder and the reg. It can be fixed onto the barrel by two symmetrical grub screws that push small Nylon parts to the barrel and thus don’t scratch its surface.
With stainless steel screws, all secured against falling out. Easy mounting (you’ll have to drill only a 5 mm hole).
For a perfect solution please see also: FWB Anti-POI-Shift Rail
Scorpion FT Hook Extras MK4
Extras and spare/replacement parts for the old Scorpion MK4 FT hook system.
Scorpion MK5 extra parts are here: Scorpion FT Hook Extras MK5
Fitting the hook to different stocks: see Scorpion Base Plates
EagleEye Clicks Magnifier
Magnifier for the clicks turret, fully adjustable, with a lightweight and unbreakable 3x mag Fresnel lens. Visible lens size 28×17 mm. Fits 1″ / 30mm / 34mm / 36mm / 40mm scope tubes. It can happen that you’ll need a stronger or weaker lens (depends on your eyesight), the frame can hold any flat lens up to 0.8 mm thickness or an acrylic lens that is cut to the right shape.
Check out its brother, too: EagleEye Parallax Magnifier. Please note that there is a new design that may slightly differ from the pictures.
The magnifiers can be ordered also in ‘Target shooter’ version with two magnifying windows (for elevation and windage turret)
New updated ring design is available. The same function but a better looking ring, scope tube protection, bolt/nut secured against falling out.
For more features and combinations with other scope ring features see Every Possible (And Impossible) Scope Ring Combination.
GAPacity Sidewheel + Free Pointer
This product has been discontinued. Check out the new design, the Composite series:
- Composite Parallax Wheels: 125mm and 150mm DualCore (round centered/excentric), 225mm effective diameter comma wheel.
- Composite Click Turret: 54 mm oversized turret, resettable without tool, wit or without bottoming ring.
- Composite Zoom Lever: stylish and handy zoom lever.
- All three in a bundle on a reduced price: Composite Scope Kit
MicroLevel Adapter For Sightron S-III
Adapter for using MicroLevel electronic level indicator on Sightron S-III scopes with reticle illumination.
It can be mounted on the ocular tube, the tapered end goes into the MicroLevel’s rubber ring and has got grooves for the cable tie fixing. The inside will remain matte black for reducing light reflections. Four different lengths, by cutting off one or more rings from the end, each cut shortens it by 6 mm.
For more info please contact me.
Reviews
There are no reviews yet.