Description
How adjustments work:
Folding up to the safe position, onto the top of the scope:
£34.99 – £39.99
Magnifier for the parallax wheel, fully adjustable, with a lightweight and unbreakable Fresnel lens. Visible lens size 12.5×38.5 mm. Fits to all major scopes, can be folded up for safe carrying.
Please understand that it can happen that you’ll need a stronger or weaker lens (depends on your eyesight), the frame can hold any flat lens up to 0.8 mm thickness or an acrylic lens that is cut to the right shape.
If you have got a rubber ‘scope enhancer’, you can choose the special ‘Enhancer’ version that is a flexible half cylinder and can be mounted on the rubber enhancer by two massive cable ties.
Check out my new clicks magnifier, too: EagleEye Clicks Magnifier.
New updated ring design: The same function but a much wider adjustment range (40-45mm or 42-47mm) and a better looking ring, ocular tube protection, bolt/nut secured against falling out.
How adjustments work:
Folding up to the safe position, onto the top of the scope:
Weight | 20 g |
---|---|
DIAMETER | 40-45mm New design, 42-47mm New design, Rubber Enhancer |
Only logged in customers who have purchased this product may leave a review.
Precisely adjustable pointer for reading the parallax wheels in different conditions. For temperature shifting scopes, light/dark environments, old eyes etc.
Fits 1″ / 30mm / 34mm / 36mm / 40mm scope tubes or 42-43 mm ocular tubes for shark fin wheels – and needs only 10×10 mm space in width and length as seen on the picture. With stainless steel screws and steel pins.
This pointer can be adjusted within 20 mm or 30 mm with a thumb screw, allowing precise and repeatable positioning of the pointer. The scale has 2 mm divisions. No need to fix and release, the pin has got some friction so it always stays where you set it with the screw, no accidental move (by your shooting jacket or rifle case).
The adjustable pointer comes with an additional pin 3 mm under the other one, for combining the effects (e.g. use the screw adjustment of the pointer to compensate scope temp shift and use the two pins for light and dark targets). If you need a longer or shaped pin, you can simply replace the original steel pins with any <1mm wire or paper clip.
New updated ring design is available. The same function but a better looking ring, scope tube protection, bolt/nut secured against falling out.
For more features and combinations with other scope ring features see Every Possible (And Impossible) Scope Ring Combination.
Precision offset trigger with wide range of adjustments, for the following rifles:
The trigger can be ordered with a wide variety of different trigger blades on a bundle price (they can be ordered later on full price here: FlexiPoint spare blades).
In most cases, it’s recommended to use the genuine FlexiPoint Trigger, because it connects more steady to the rifle action, using both trigger rods (German made rifles) or holding the rod by two grub screws (AirArms). But if you’ve got a custom stock that is too tight for the FlexiPoint trigger, a possible solution is to use a PinPoint trigger with this offset blade. For this option, simply choose PinPoint in ‘Adapter type’ drop-down menu.
If you’re after a simpler trigger which is in the centre or has only a small offset, please have a look at PinPoint v.2 Trigger, too.
Custom base plates and adapters for the Scorpion Field Target Hook, to fit it to different rifle stocks
Other spare parts are available here: Scorpion FT Hook Extras.
Replacement elements for the FWB P70 Alutec stock, giving new features to the rifle:
Also the original grip can be used (but without the offset feature). The parts are made of laser sintered Nylon, lightweight but very strong, I personally have tested this kit on my rifle. The new design elevates the cheek piece part so it fits better to high FT scopes. The grip is fully adjustable, and the offset can be set between 7.5 and 22.5 mm.
Right handed, used but in “as new” condition, with some very small usage marks. Can be bought with a ball grip and/or with a grey anatomic grip.
In order to use this kit, you have to cut your original stock, and drill 3 new holes onto it, I’ll attach the technical drawings of all these modifications of course.
I can offer a full FWB collection, please contact me for a discounted price if you are interested in the following products together:
Simple and lightweight scope pointer. Fits to all 1″ / 30 mm / 34 mm scope tubes, and needs only 10×10 mm space in width and length as seen on the picture.
For 36mm and 40mm tube diameters see EasyPin Extra
For click turrets with a custom made cap, or for sidewheels. With stainless steel screws and steel pin. If you need a longer or shaped pin, you can simply replace the original pin with any <1mm wire. Find out which pointer suits you best: Scope Pointer Comparison Table
NEW: there is an advanced version of this pointer available, too, with adjustable pin angle and also for 36mm and 40mm scope tubes: EasyPin Extra Scope Pointer
Professional folding windicator with orange Nylon cord or alligator clips. Fits to any barrel or air cylinder (with the included adapter), 11mm dovetails, Picatinny/Weaver rails, standard UIT accessory rails, 1″ (25.4mm), 30mm and 34mm scope tubes.
The arm clicks into position when folded in or out (except for the scope ring versions). Ready to use with cable ties / bolts and cord, but of course you can replace the cord any time you like. Unbreakable, flexible, and only 7 grams. Made of high quality laser sintered Nylon, stainless steel nut and bolt.
NEW: also available with new design scope rings. For more features and combinations with other scope ring features see Every Possible (And Impossible) Scope Ring Combination.
NEW: all the windicators are available with alligator clips, too. See the options below.
Last ones of the old MK4 design ON SALE
Click here for the Scorpion New Design version.
Fully adjustable Field Target hook, with much more versatility than the usual Gemini clones. Everything can be adjusted even in the shooting position, without disassembling the hook. Modular system that can be upgraded later if needed.
Massive construction, without any flex and slip, a lightweight and versatile alternative to the traditional metal hooks.A
These are the very last ones of the old MK4 design and are on sale, so I can offer them only in these configurations listed below, but you can reduce the upper wing length if needed, or can add some extra parts in the options menu.
It is possible to buy certain MK5 parts as well, for a partial upgrade (but please contact me before placing an order to check compatibility!)
For additional extras and spare parts please see Scorpion FT Hook Extras
Fitting the hook to different stocks: see Scorpion Base Plates
The left handed versions are True L/H, i.e. fully mirrored in every detail.
Adapter piece to contact your existing FolloWing / SteadyWing / TopWing upper wing extension to another rifle or hook system:
If you can’t find your hook here, don’t worry! Please contact me with your rifle details and I’ll design your own adapter.
All versions come with appropriate stainless steel bolts and nuts and are ready to connect to your hook.
For more information please read the Product Description below.
These items are only spare parts for my trigger system (in black colour only), and allow you to try different surfaces and shapes to make sure, which one fits you the best in practice.
If you’d like to have a complete trigger, please click here: FlexiPoint offset trigger.
For detailed information please click on the tabs below:
Ball trigger with a 5 and an 8 mm ball on the two ends. Ball triggers are fine because you’ll always have the same trigger weight, but it’s a severe problem that you can’t feel the direction of the pull. If you ask me, you should rather choose a round trigger instead from my standard blades, it’s much better. This Ball trigger is available in Offset version, too.
Small horizontal trigger with pyramids on both sides (fine and coarse). Similar to the ball but you can feel the direction of the pull.
These blades have a big round surface that fits to the fingertip. There are four different surfaces, they look quite similar but each version gives a totally different feel on the trigger, so you can choose the one that fits to your shooting style the best.
Traditional straight and curved blades, 8mm wide, 20mm high surface with vertical grooves, the middle height is marked with a horizontal groove.
This product has been discontinued. Check out the new design, the Composite series:
* SALE Scorpion MK4 * NEW Scorpion MK5 * NEW Ocular Tube Pointers * Dismiss
Reviews
There are no reviews yet.