The world’s first dedicated Field Target glove, designed specially for FT / HFT shooting, by a Field Target shooter. This is a high quality heavy target glove, for the leading hand (left hand for a right-handed shooter and vica versa), padded and with Top Grip on most surfaces.
Three fingers are half length so the shooter can easily rangefind and click the scope. Thick but quite flexible Top Grip pads on every surface where needed for every shooting position and with elastic wrist band.
Available sizes: XS, S, M, L, XL – please check the sizing guide below for your glove.
Available colours: Black, Blue, Red (sorry but only Black for L/H shooters)
The world’s first lightweight Field Target gloves, designed specially for FT / HFT shooting, by a Field Target shooter. These are light but very useful gloves, for the firing hand but also for the leading hand if you don’t like massive target gloves. The prices are per two pairs (one for winter and one for Summer), so you’ll get two glove for each hand. See the product description at the bottom of this page for more information.
Available sizes: S, M, L, XL – see the glove sizing guide below.
Flat barrel weight for Feinwerkbau rifles. The same weight (79 g) as the original FWB aluminium barrel weight but allows using longer cylinders – it is only 1 mm thick below and above the barrel. Laser sintered Nylon, with stainless steel grub screws.
Intimidate your opponents with a rifle that looks like a .50 cal sniper gun! ;-)
Designed for Feinwerkbau rifles but can fit to any other rifle with a 20 mm barrel shroud diameter (e.g. Anschütz). For other diameters please contact me.
Pellet collector for pellet sizers (UK Neil d=16mm round and hexagonal 16mm at the moment), but I can design a variation for you to any other size). Please note that the pellet sizer is NOT included, it has to be bought separately from UK Neil or other manufacturers.
Can collect about 300 pellets. If you take the bottom plate off, will fit firmly into a tin so you can size the pellets directly into the tin.
It can be personalised with your name/nickname, too.
Laser sintered Nylon in black velvet colour, stainless steel screws.
Some words from the product’s first user: “A great product. Very light. The UK Neil sizer slides into the ink well holder for a perfectly snug fit.Enables speedy sizing and any pellets dropped fall onto the top of the well. This stops the odd dropped pellet falling into your sized pellets by mistake. Perfect.“
Comfortable handle for the loading port of Feinwerkbau rifles. Replaces the original ugly white handle with a much better one. In R/H and L/H versions, made of laser sintered Nylon with stainless steel screws.
With this, you can close the loading port by rotating the handle easily by the two rounded ends, instead of pushing it down with a quite big force.
The handle is combined with an automated safety mark: when the loading port is open, a piece of flexible cable tie blocks your trigger finger, but goes out of the way when the port is closed.