Combro Chronies use IR photodiodes as light source so they don’t need external light, but direct sunshine or fluorescent lights may disturb its function, resulting false readings.
This simple shade can be snapped onto the Chrony and gives an effective shade for the light sensors.
The new extended version connects with a bayonet to the Sniper barrel weight, keeping the chrony on its place, aligned with the barrel.
Precision offset trigger with wide range of adjustments, for the following rifles:
Anschütz
AirArms Pro-Target / EV-2 / FTP-900
Feinwerkbau (all models)
Hämmerli AR-20
Steyr LG-100/110
Thomas
Walther (all models)
The trigger can be ordered with a wide variety of different trigger blades on a bundle price (they can be ordered later on full price here: FlexiPoint spare blades).
In most cases, it’s recommended to use the genuine FlexiPoint Trigger, because it connects more steady to the rifle action, using both trigger rods (German made rifles) or holding the rod by two grub screws (AirArms). But if you’ve got a custom stock that is too tight for the FlexiPoint trigger, a possible solution is to use a PinPoint trigger with this offset blade. For this option, simply choose PinPoint in ‘Adapter type’ drop-down menu.
If you’re after a simpler trigger which is in the centre or has only a small offset, please have a look at PinPoint v.2 Trigger, too.
Get your rifle into a true level with these adjustable bubble level bases: you can fine tune its angle and eliminate canting effects.
It comes complete with a bubble level and connects:
to the rifle with a standard dovetail (10mm wide at the neck but the material is easy to carve if needed), or
to the scope with a 1″ / 30mm / 34mm ring.
Please check before buying that there is enough space for this part on your rifle. The rings need a 10mm wide spece on your scope tube, and the dovetail based unit requires at least 25mm above the top of the dovetail.
New updated ring design is available. The same function but a better looking ring, scope tube protection, bolt/nut secured against falling out.
These items are only spare parts for my trigger system (in black colour only), and allow you to try different surfaces and shapes to make sure, which one fits you the best in practice.
Ball trigger with a 5 and an 8 mm ball on the two ends. Ball triggers are fine because you’ll always have the same trigger weight, but it’s a severe problem that you can’t feel the direction of the pull. If you ask me, you should rather choose a round trigger instead from my standard blades, it’s much better. This Ball trigger is available in Offset version, too.
Small horizontal trigger with pyramids on both sides (fine and coarse). Similar to the ball but you can feel the direction of the pull.
These blades have a big round surface that fits to the fingertip. There are four different surfaces, they look quite similar but each version gives a totally different feel on the trigger, so you can choose the one that fits to your shooting style the best.
‘Centre’ gives a d=2 mm sharp point in the middle, giving a very precise feedback of the actual pull weight, the edge gives only a small hint of the right pull direction.
‘Deep’ follows the shape of the fingertip, giving a comfortable and evenly distributed contact on the whole surface.
‘Edge’ is for those who are after the right pull direction, combined with a comfortable feeling of the deeper middle surface.
‘Flat’ feels like a flat surface, simple and precise.
Traditional straight and curved blades, 8mm wide, 20mm high surface with vertical grooves, the middle height is marked with a horizontal groove.
The FWB Anti-POI-Shift Kit stands of two laser sintered Nylon parts, they look the same but they’re a bit different inside:
One of them replaces the original A-clamp and holds only the cylinder and protects the barrel from accidental kicks but lets it free float.
The other one goes to the joint of the air cylinder and the reg. It can be fixed onto the barrel by two symmetrical grub screws that push small Nylon parts to the barrel and thus don’t scratch its surface.
With stainless steel screws, all secured against falling out. Easy mounting (you’ll have to drill only a 5 mm hole).
Professional folding windicator with orange Nylon cord or alligator clips. Fits to any barrel or air cylinder (with the included adapter), 11mm dovetails, Picatinny/Weaver rails, standard UIT accessory rails, 1″ (25.4mm), 30mm and 34mm scope tubes.
The arm clicks into position when folded in or out (except for the scope ring versions). Ready to use with cable ties / bolts and cord, but of course you can replace the cord any time you like. Unbreakable, flexible, and only 7 grams. Made of high quality laser sintered Nylon, stainless steel nut and bolt.
NEW: also available with new design scope rings. For more features and combinations with other scope ring features see Every Possible (And Impossible) Scope Ring Combination. NEW: all the windicators are available with alligator clips, too. See the options below.
The same hamster (palm shelf, knee rest etc.) design that I use on my own rifle, with 5, 6 or 7 big indents (183 / 217 / 251mm overall length) on the sides for a sure grip in kneeling position or when carrying the rifle.
High quality laser sintered Nylon, lightweight and strong material. Comes with stainless steel bolts and nuts.
Available in two versions (hamster only, or hamster + adapter).
Elegantly designed stand for your BFTA Grand Prix badge (or other butterfly clutch type badges), so that it can have a worthy place among your other trophies. High quality laser sintered Nylon, polished surface.
Engraved plate with custom text is available as an additional option (please note that this adds 3-4 days to the delivery date).
Reviews
There are no reviews yet.