Additional information
Weight | 38 g |
---|---|
YOUR PELLET SIZER | Round d=12.7mm, Round d=16mm, Hexagonal 16mm, Custom size |
£49.99 – £54.99
Pellet collector for pellet sizers. Please note that the pellet sizer is NOT included, it has to be bought separately from UK Neil or other manufacturers.
Can collect about 300 pellets. If you take the bottom plate off, will fit firmly into a tin so you can size the pellets directly into the tin.
High quality laser sintered Nylon (black dyed and polished), stainless steel screws.
Some words from the product’s first user: “A great product. Very light. The UK Neil sizer slides into the ink well holder for a perfectly snug fit. Enables speedy sizing and any pellets dropped fall onto the top of the well. This stops the odd dropped pellet falling into your sized pellets by mistake. Perfect.“
And a short review on Youtube from another customer: https://youtu.be/DlvtUxTHPSs?t=343
Weight | 38 g |
---|---|
YOUR PELLET SIZER | Round d=12.7mm, Round d=16mm, Hexagonal 16mm, Custom size |
Only logged in customers who have purchased this product may leave a review.
Get your rifle into a true level with these adjustable bubble level bases: you can fine tune its angle and eliminate canting effects.
It comes complete with a bubble level and connects:
Please check before buying that there is enough space for this part on your rifle. The rings need a 10mm wide spece on your scope tube, and the dovetail based unit requires at least 25mm above the top of the dovetail.
New updated ring design is available. The same function but a better looking ring, scope tube protection, bolt/nut secured against falling out.
Snap-on shade for Combro Chrony
Combro Chronies use IR photodiodes as light source so they don’t need external light, but direct sunshine or fluorescent lights may disturb its function, resulting false readings.
This simple shade can be snapped onto the Chrony and gives an effective shade for the light sensors.
The new extended version connects with a bayonet to the Sniper barrel weight, keeping the chrony on its place, aligned with the barrel.
Elegantly designed stand for your BFTA Grand Prix badge (or other butterfly clutch type badges), so that it can have a worthy place among your other trophies. High quality laser sintered Nylon, polished surface.
Engraved plate with custom text is available as an additional option (please note that this adds 3-4 days to the delivery date).
The official WFTF Target Checker (designed by Brian Samson, public domain, printed under the Creative Commons CC0 licence).
“The device is designed to give an equivalent impact force to an airgun pellet hitting the paddle of a target at 5.5 ft/lbs energy (7 Joules). To mimic the effect of a target being shot at with a WFTF legal air rifle at 55 yards.”
Fully assembled and ready to use. High quality 3D-printed PLA/PHA in black and orange colours, stainless steel bolts/nuts.
MK2 2018– Brian’s original design
MK3 2019 – Smaller improvements like easily adjustable depth gauge, wrist strap, killzone diameter checkers etc., see below for more details.
MK4 2020 – Further improvements to resolve all issues of the original design. Re-designed internal parts, spring tension can be fine-tuned with a hex key, free travel length of the probe doubled.
MK4.1 2023 – Further improvements, small modifications, safer trigger etc.
MK4.2 2024 – Morer improvements, re-designed trigger, spring guide etc.
Available colours: Dutch Orange, Ultra Marine Blue, Traffic Red, Leaf Green, Intense Green, Fluorescent Pink and Signal Yellow, all with black sides.
Detailed instructions manual (by Scott Hull): download PDF
Flat barrel weight for Feinwerkbau / Anschütz rifles. The same weight (79 g) as the original FWB aluminium barrel weight but allows using longer cylinders – it is only 1 mm thick below and above the barrel. Laser sintered Nylon, with stainless steel grub screw. The M6 threaded holes at the bottom allow you to add up to 10 grub screws to fine tune the total weight and its distribution. The barrel weight aligns itself to the dovetail at the end of FWB barrel. It clamps onto the barrel only with Nylon parts so doesn’t scratch the barrel surface.
New: available also for Daystate Griffin, everything the same as above.
New version: Similar for Steyr but longer, with three air stripper plates as well. ComBrella can’t be connected to this model.
Intimidate your opponents with a rifle that looks like a .50 cal sniper gun! ;-)
Now you can have it with the ComBrella shade that can hold a Combro chrony and connects with a bayonet to the barrel weight, keeping the chrony on its place, aligned with the barrel and protecting it from the sunlight.
It can be ordered with a built-in folding windicator, too.
Professional folding windicator with orange Nylon cord or alligator clips. Fits to any barrel or air cylinder (with the included adapter), 11mm dovetails, Picatinny/Weaver rails, standard UIT accessory rails, 1″ (25.4mm), 30mm and 34mm scope tubes.
The arm clicks into position when folded in or out (except for the scope ring versions). Ready to use with cable ties / bolts and cord, but of course you can replace the cord any time you like. Unbreakable, flexible, and only 7 grams. Made of high quality laser sintered Nylon, stainless steel nut and bolt.
NEW: also available with new design scope rings. For more features and combinations with other scope ring features see Every Possible (And Impossible) Scope Ring Combination.
NEW: all the windicators are available with alligator clips, too. See the options below.
Genuine Feinwerkbau P70FT barrel weight, may fit other rifles, too (please check the diameter of your barrel before ordering).
With an extra M6 hole for a windicator.
Aluminum, 77g and the inside diameter is 19.91mm
Comfortable handle for the loading port of Feinwerkbau P70 rifles. Replaces the original ugly white handle with a much better one. In R/H and L/H versions, made of laser sintered Nylon with stainless steel screws.
With this, you can close the loading port by rotating the handle easily by the two rounded ends, instead of pushing it down with a quite big force.
The handle is combined with an automated safety mark: when the loading port is open, a piece of flexible cable tie blocks your trigger finger, but goes out of the way when the port is closed.
* SALE Scorpion MK4 * NEW Scorpion MK5 * NEW Ocular Tube Pointers * Dismiss
Reviews
There are no reviews yet.