- Please choose product options by visiting ComBrella shade for Combro.
EasyPin Extra Pointer
£19.99 – £28.99
Adjustable angle scope pointer (10°–90° to the scope tube, two positions). Fits 1″ / 30mm / 34mm / 36mm / 40mm scope tubes, and needs only 10 mm space on the tube. The top is 11.5 mm above the tube in vertical pin position..
For parallax wheels and click turrets.
With stainless steel screws and steel pin. If you need a longer or shaped pin, you can simply replace the original pin with any <1mm wire.
New updated ring design is available. The same function but a better looking ring, scope tube protection, bolt/nut secured against falling out.
The 30/34mm new design pointers are available in a ‘Target’ version i.e. with two pointers, one for the elevation turret and another on on the side for the windage turret.
For more features and combinations with other scope ring features see Every Possible (And Impossible) Scope Ring Combination.
Additional information
Weight | 7 g |
---|---|
DIAMETER | 1" (25.4 mm), 30 mm, 34 mm, 36 mm, 40 mm |
DESIGN | Old design, New design |
Only logged in customers who have purchased this product may leave a review.
You may also like…
FlexiPoint Offset Trigger
Precision offset trigger with wide range of adjustments, for the following rifles:
- Anschütz
- AirArms Pro-Target / EV-2 / FTP-900
- Feinwerkbau (all models)
- Hämmerli AR-20
- Steyr LG-100/110
- Thomas
- Walther (all models)
The trigger can be ordered with a wide variety of different trigger blades on a bundle price (they can be ordered later on full price here: FlexiPoint spare blades).
In most cases, it’s recommended to use the genuine FlexiPoint Trigger, because it connects more steady to the rifle action, using both trigger rods (German made rifles) or holding the rod by two grub screws (AirArms). But if you’ve got a custom stock that is too tight for the FlexiPoint trigger, a possible solution is to use a PinPoint trigger with this offset blade. For this option, simply choose PinPoint in ‘Adapter type’ drop-down menu.
If you’re after a simpler trigger which is in the centre or has only a small offset, please have a look at PinPoint v.2 Trigger, too.
Related Products
WFTF Target Checker
The official WFTF Target Checker (designed by Brian Samson, public domain, printed under the Creative Commons CC0 licence).
“The device is designed to give an equivalent impact force to an airgun pellet hitting the paddle of a target at 5.5 ft/lbs energy (7 Joules). To mimic the effect of a target being shot at with a WFTF legal air rifle at 55 yards.”
Fully assembled and ready to use. High quality 3D-printed PLA/PHA in black and orange colours, stainless steel bolts/nuts.
MK2 2018– Brian’s original design
MK3 2019 – Smaller improvements like easily adjustable depth gauge, wrist strap, killzone diameter checkers etc., see below for more details.
MK4 2020 – Further improvements to resolve all issues of the original design. Re-designed internal parts, spring tension can be fine-tuned with a hex key, free travel length of the probe doubled.
MK4.1 2023 – Further improvements, small modifications, safer trigger etc.
MK4.2 2024 – Morer improvements, re-designed trigger, spring guide etc.
Available colours: Dutch Orange, Ultra Marine Blue, Traffic Red, Leaf Green, Intense Green, Fluorescent Pink and Signal Yellow, all with black sides.
Detailed instructions manual (by Scott Hull): download PDF
FWB Anti-POI-Shift Kit
The FWB Anti-POI-Shift Kit stands of two laser sintered Nylon parts, they look the same but they’re a bit different inside:
- One of them replaces the original A-clamp and holds only the cylinder and protects the barrel from accidental kicks but lets it free float.
- The other one goes to the joint of the air cylinder and the reg. It can be fixed onto the barrel by two symmetrical grub screws that push small Nylon parts to the barrel and thus don’t scratch its surface.
With stainless steel screws, all secured against falling out. Easy mounting (you’ll have to drill only a 5 mm hole).
For a perfect solution please see also: FWB Anti-POI-Shift Rail
Composite Scope Kit Bundle
Complete kit of Composite Wheel / Click / Zoom accessories in a bundle
With appropriate adjustable pointers.
- Composite Parallax Wheels: 82mm round, 125mm and 150mm DualCore (round centered/excentric), 229mm effective diameter comma wheel + SmartPin pointer with extended scale,
- Composite Click Turret: 54 mm oversized turret, resettable without tool, wit or without bottoming ring + EasyPin Extra pointer,
- Composite Zoom Lever: stylish and handy zoom lever.
MicroLevel Adapter For Sightron S-III
Adapter for using MicroLevel electronic level indicator on Sightron S-III scopes with reticle illumination.
It can be mounted on the ocular tube, the tapered end goes into the MicroLevel’s rubber ring and has got grooves for the cable tie fixing. The inside will remain matte black for reducing light reflections. Four different lengths, by cutting off one or more rings from the end, each cut shortens it by 6 mm.
For more info please contact me.
PinPoint v.2 Trigger
Precision trigger for the following rifles:
- Anschütz
- AirArms Pro-Target / EV-2 / FTP-900
- Daystate Adjustable Trigger
- Feinwerkbau (all models)
- FX Impact
- Hämmerli AR-20
- Steyr LG-100/110
- Suhl 150
- Thomas
- Walther (all models)
The trigger can be ordered with a wide variety of different trigger blades on a bundle price (they can be ordered later on full price here: FlexiPoint spare blades).
Offset 0-10mm to both sides. If you need a trigger with more offset (up to 46 mm!) and much more adjustment options, check out my Flexipoint trigger.
DualCore Sidewheel + SmartPin Pointer
A unique parallax wheel with two centres: can be used in centered or in excentric position, wide space for the scale, strong and unbreakable. See the details at the bottom on the page.
This sidewheel has been designed on a way, that it will fit to the scope and to my SmartPin Pointer and ProTurret Click Knob as well. If you order only a sidewheel, please make sure that it does not clash with the third party accessories. If you have any questions, please contact me before placing an order.
The pointers fit perfectly to my sidewheel. The ring size will be automatically selected according to your scope’s tube diameter. If you want me to send a pointer with an extended scale (10 mm more travel for the pin/stripe), please select your pointer type here and add 5 pounds to the order by using the Additional Payment page.
Made of strong UV-stable ASA polymer (professionally polished), with stainless steel screws. Please note that I have slightly modified the design, certain wheels may differ in smaller details compared to the photos.
This product has been discontinued, check out the new design, the Composite series:
- Composite Parallax Wheels: 125mm and 150mm DualCore (round centered/excentric), 225mm effective diameter comma wheel.
- Composite Click Turret: 54 mm oversized turret, resettable without tool, wit or without bottoming ring.
- Composite Zoom Lever: stylish and handy zoom lever.
- All three in a bundle on a reduced price: Composite Scope Kit
FWB Loading Port Handle
Comfortable handle for the loading port of Feinwerkbau P70 rifles. Replaces the original ugly white handle with a much better one. In R/H and L/H versions, made of laser sintered Nylon with stainless steel screws.
With this, you can close the loading port by rotating the handle easily by the two rounded ends, instead of pushing it down with a quite big force.
The handle is combined with an automated safety mark: when the loading port is open, a piece of flexible cable tie blocks your trigger finger, but goes out of the way when the port is closed.
Anti-POI-Shift Rail (for Feinwerkbau / Anschütz)
High quality scope rail for Feinwerkbau or Anschütz PCP rifles. Designed especially to work together with my FWB Anti-POI-Shift Kit, using these products together eliminates the POI-shifts on Feinwerkbau Alutec stocks. I’ve been using the same solution on my rifle, and the last time I zeroed my rifle was in 2012, need to tell anything more?!?
Made of aircraft grade aluminium alloy, black anodised with stainless steel bolts or silver anodised with black bolts. Elevation 35 mm, reproduces the same dovetail on the top as the rifle’s original dovetail. The in-built slope is 0.71% = 24.4 MOA so any simple mount ring will do without shimming.
For a perfect solution please see also: FWB Anti-POI-Shift Kit.
Reviews
There are no reviews yet.