SmartPin Coloured
Experimental project:…
Coloured versions of the FT industrial standard SmartPin Adjustable Pointer.
The usual quality laser sintered Nylon parts just in another colours.
There is only one from each colour (Red, Green, Blue and Yellow) with the following parameters:
- Ring diameter 30mm
- Scale length 30mm
- Pointer 2-pins
- New design
Have fun! :-)
EasyPin Extra Pointer
Adjustable angle scope pointer (10°–90° to the scope tube, two positions). Fits 1″ / 30mm / 34mm / 36mm / 40mm scope tubes, and needs only 10 mm space on the tube. The top is 11.5 mm above the tube in vertical pin position..
For parallax wheels and click turrets.
With stainless steel screws and steel pin. If you need a longer or shaped pin, you can simply replace the original pin with any <1mm wire.
New updated ring design is available. The same function but a better looking ring, scope tube protection, bolt/nut secured against falling out.
The 30/34mm new design pointers are available in a ‘Target’ version i.e. with two pointers, one for the elevation turret and another on on the side for the windage turret.
For more features and combinations with other scope ring features see Every Possible (And Impossible) Scope Ring Combination.
EasyPin Pointer
Simple and lightweight scope pointer. Fits to all 1″ / 30 mm / 34 mm scope tubes, and needs only 10×10 mm space in width and length as seen on the picture.
For 36mm and 40mm tube diameters see EasyPin Extra
For click turrets with a custom made cap, or for sidewheels. With stainless steel screws and steel pin. If you need a longer or shaped pin, you can simply replace the original pin with any <1mm wire. Find out which pointer suits you best: Scope Pointer Comparison Table
NEW: there is an advanced version of this pointer available, too, with adjustable pin angle and also for 36mm and 40mm scope tubes: EasyPin Extra Scope Pointer
FWB Stock Middle Parts
Replacement elements for the FWB P70 Alutec stock, giving new features to the rifle:
- Fully adjustable offset grip
- Elevating the rear part by 50 mm
- Saving 250 g weight
Also the original grip can be used (but without the offset feature). The parts are made of laser sintered Nylon, lightweight but very strong, I personally have tested this kit on my rifle. The new design elevates the cheek piece part so it fits better to high FT scopes. The grip is fully adjustable, and the offset can be set between 7.5 and 22.5 mm.
Right handed, used but in “as new” condition, with some very small usage marks. Can be bought with a ball grip and/or with a grey anatomic grip.
In order to use this kit, you have to cut your original stock, and drill 3 new holes onto it, I’ll attach the technical drawings of all these modifications of course.
I can offer a full FWB collection, please contact me for a discounted price if you are interested in the following products together:
- This kit
- FWB Anti-POI-Shift Kit (optionally with FWB Anti-POI-Shift Rail)
- FWB Loading Port Handle
- FlexiPoint Offset Trigger for FWB
- FlexiPoint Additional Trigger Blade
FWB Loading Port Handle
Comfortable handle for the loading port of Feinwerkbau P70 rifles. Replaces the original ugly white handle with a much better one. In R/H and L/H versions, made of laser sintered Nylon with stainless steel screws.
With this, you can close the loading port by rotating the handle easily by the two rounded ends, instead of pushing it down with a quite big force.
The handle is combined with an automated safety mark: when the loading port is open, a piece of flexible cable tie blocks your trigger finger, but goes out of the way when the port is closed.
EagleEye Clicks Magnifier
Magnifier for the clicks turret, fully adjustable, with a lightweight and unbreakable 3x mag Fresnel lens. Visible lens size 28×17 mm. Fits 1″ / 30mm / 34mm / 36mm / 40mm scope tubes. It can happen that you’ll need a stronger or weaker lens (depends on your eyesight), the frame can hold any flat lens up to 0.8 mm thickness or an acrylic lens that is cut to the right shape.
Check out its brother, too: EagleEye Parallax Magnifier. Please note that there is a new design that may slightly differ from the pictures.
The magnifiers can be ordered also in ‘Target shooter’ version with two magnifying windows (for elevation and windage turret)
New updated ring design is available. The same function but a better looking ring, scope tube protection, bolt/nut secured against falling out.
For more features and combinations with other scope ring features see Every Possible (And Impossible) Scope Ring Combination.
EagleEye Parallax Magnifier
Magnifier for the parallax wheel, fully adjustable, with a lightweight and unbreakable Fresnel lens. Visible lens size 12.5×38.5 mm. Fits to all major scopes, can be folded up for safe carrying.
Please understand that it can happen that you’ll need a stronger or weaker lens (depends on your eyesight), the frame can hold any flat lens up to 0.8 mm thickness or an acrylic lens that is cut to the right shape.
If you have got a rubber ‘scope enhancer’, you can choose the special ‘Enhancer’ version that is a flexible half cylinder and can be mounted on the rubber enhancer by two massive cable ties.
Check out my new clicks magnifier, too: EagleEye Clicks Magnifier.
New updated ring design: The same function but a much wider adjustment range (40-45mm or 42-47mm) and a better looking ring, ocular tube protection, bolt/nut secured against falling out.
Anti-POI-Shift Rail (for Feinwerkbau / Anschütz)
High quality scope rail for Feinwerkbau or Anschütz PCP rifles. Designed especially to work together with my FWB Anti-POI-Shift Kit, using these products together eliminates the POI-shifts on Feinwerkbau Alutec stocks. I’ve been using the same solution on my rifle, and the last time I zeroed my rifle was in 2012, need to tell anything more?!?
Made of aircraft grade aluminium alloy, black anodised with stainless steel bolts or silver anodised with black bolts. Elevation 35 mm, reproduces the same dovetail on the top as the rifle’s original dovetail. The in-built slope is 0.71% = 24.4 MOA so any simple mount ring will do without shimming.
For a perfect solution please see also: FWB Anti-POI-Shift Kit.
FWB Anti-POI-Shift Kit
The FWB Anti-POI-Shift Kit stands of two laser sintered Nylon parts, they look the same but they’re a bit different inside:
- One of them replaces the original A-clamp and holds only the cylinder and protects the barrel from accidental kicks but lets it free float.
- The other one goes to the joint of the air cylinder and the reg. It can be fixed onto the barrel by two symmetrical grub screws that push small Nylon parts to the barrel and thus don’t scratch its surface.
With stainless steel screws, all secured against falling out. Easy mounting (you’ll have to drill only a 5 mm hole).
For a perfect solution please see also: FWB Anti-POI-Shift Rail
FlexiPoint Offset Trigger
Precision offset trigger with wide range of adjustments, for the following rifles:
- Anschütz
- AirArms Pro-Target / EV-2 / FTP-900
- Feinwerkbau (all models)
- Hämmerli AR-20
- Steyr LG-100/110
- Thomas
- Walther (all models)
The trigger can be ordered with a wide variety of different trigger blades on a bundle price (they can be ordered later on full price here: FlexiPoint spare blades).
In most cases, it’s recommended to use the genuine FlexiPoint Trigger, because it connects more steady to the rifle action, using both trigger rods (German made rifles) or holding the rod by two grub screws (AirArms). But if you’ve got a custom stock that is too tight for the FlexiPoint trigger, a possible solution is to use a PinPoint trigger with this offset blade. For this option, simply choose PinPoint in ‘Adapter type’ drop-down menu.
If you’re after a simpler trigger which is in the centre or has only a small offset, please have a look at PinPoint v.2 Trigger, too.
JOPA Folding Bipod
Folding bipod, made of quality materials. Body: black or silver anodised aluminium alloy, legs: 5mm stainless steel with 20mm black plastic balls.
Long legs (12.5cm = 5″ between the ground and the rifle’s stock)
Fits to all rifles with standard accessory rail or similar (AirArms, Anschütz, Walther, Steyr, Feinwerkbau, Hämmerli etc.)
Sorry this product is discontinued but now I have two black ex demo pieces available, been used for a couple of competitions, photo sessions and as a demo when selling other ones on international competitions. In excellent condition, only with a few marks from being mounted onto a rifle.
These are the very last ones of the JOPA series.
Check out my new Atlas Extra Wide FT Bipod
PinPoint v.2 Trigger
Precision trigger for the following rifles:
- Anschütz
- AirArms Pro-Target / EV-2 / FTP-900
- Daystate Adjustable Trigger
- Feinwerkbau (all models)
- FX Impact
- Hämmerli AR-20
- Steyr LG-100/110
- Suhl 150
- Thomas
- Walther (all models)
The trigger can be ordered with a wide variety of different trigger blades on a bundle price (they can be ordered later on full price here: FlexiPoint spare blades).
Offset 0-10mm to both sides. If you need a trigger with more offset (up to 46 mm!) and much more adjustment options, check out my Flexipoint trigger.
FolloWing Adapter
Adapter piece to contact your existing FolloWing / SteadyWing / TopWing upper wing extension to another rifle or hook system:
- AirArms EV-2 / FTP-900
- Anschütz 4765 / Precise I
- Brian’s Hook
- Feinwerkbau 603 / P70 / 700 / 800
- Gehmann 809
- Grünig&Elmiger hooks
- MEC Contact-III / Free Position
- Steyr LG-100/110
- System Gemini hook
- TEC-HRO Fusion hook
- Generic adapter A (standard) / B (reverse)
If you can’t find your hook here, don’t worry! Please contact me with your rifle details and I’ll design your own adapter.
All versions come with appropriate stainless steel bolts and nuts and are ready to connect to your hook.
For more information please read the Product Description below.
ComBrella shade for Combro
Snap-on shade for Combro Chrony
Combro Chronies use IR photodiodes as light source so they don’t need external light, but direct sunshine or fluorescent lights may disturb its function, resulting false readings.
This simple shade can be snapped onto the Chrony and gives an effective shade for the light sensors.
The new extended version connects with a bayonet to the Sniper barrel weight, keeping the chrony on its place, aligned with the barrel.
WonderBar adjustable spacers (in pair)
A pair of two specially formed adjustable spacers that can connect to each other in four different heights:
Useful for spacing butt-hooks, hamsters and other rifle parts.
Prices stand for a pair of spacers.
LAST ONES!
FlexiPoint Spare Blades
These items are only spare parts for my trigger system (in black colour only), and allow you to try different surfaces and shapes to make sure, which one fits you the best in practice.
If you’d like to have a complete trigger, please click here: FlexiPoint offset trigger.
For detailed information please click on the tabs below:
Ball trigger with a 5 and an 8 mm ball on the two ends. Ball triggers are fine because you’ll always have the same trigger weight, but it’s a severe problem that you can’t feel the direction of the pull. If you ask me, you should rather choose a round trigger instead from my standard blades, it’s much better. This Ball trigger is available in Offset version, too.
Small horizontal trigger with pyramids on both sides (fine and coarse). Similar to the ball but you can feel the direction of the pull.
These blades have a big round surface that fits to the fingertip. There are four different surfaces, they look quite similar but each version gives a totally different feel on the trigger, so you can choose the one that fits to your shooting style the best.
- ‘Centre’ gives a d=2 mm sharp point in the middle, giving a very precise feedback of the actual pull weight, the edge gives only a small hint of the right pull direction.
- ‘Deep’ follows the shape of the fingertip, giving a comfortable and evenly distributed contact on the whole surface.
- ‘Edge’ is for those who are after the right pull direction, combined with a comfortable feeling of the deeper middle surface.
- ‘Flat’ feels like a flat surface, simple and precise.
Traditional straight and curved blades, 8mm wide, 20mm high surface with vertical grooves, the middle height is marked with a horizontal groove.
FWB Woodwork
Original wooden parts for FWB P70 Match/FT Alutec stock:
– Grip: R/H size L, with two threaded nuts at the bottom for mounting an additional palm shelf,
– Cheek piece: prone style (symmetric),
Colours: beech/red laminate.
All in good condition, with a few minor marks from usage, as seen on the photos.
To be sold only together.
See also: other Feinwerkbau related products
