This scope rail has been designed specially for Feinwerkbau rifles and for Field Target shooting. It has the same dovetail on the top as the Feinwerkbau’s original scope rail (60° and 10 mm wide at the neck). The default slope is 0.71% = 24.4 MOA which is fine for an international class FT rifle (16 J) and the scope height provided by this rail, but you can order it with a custom slope as well, if you’d use it with a high-powered rifle or with very high mount rings.
It gives an elevation of 35 mm (1.38″), and you can add some more by choosing the height of the scope rings.
Made of aircraft grade aluminium alloy, with natural alu anodising and black steel screws.
The Anti-POI-Shift Rail has a light and curvy look (no wonder, I’m an architect in my civil life) but it’s very massive where needed. It has a solid upper half that goes through the whole rail.
Side view, with the five high-tension screws. These screws hold the rail absolutely steady on the barrel – and only on the barrel, this is the key of getting rid of POI-shifts on Feinwerkbau (and any other) rifles.
Click here to order your FWB Anti-POI-Shift scope rail. If you really want to get rid of all POI-shift, make this solution complete with a scope rail that sits only on the barrel – this is very important! – have a look at my high quality Feinwerkbau Anti-POI-Shift Kit, too…
Leave a Reply
You must be logged in to post a comment.